sbuild (Debian sbuild) 0.78.1 (09 February 2019) on gcc131.bak.milne.osuosl.org +==============================================================================+ | gf2x 1.3.0-1 (s390x) Sun, 16 May 2021 20:53:49 +0000 | +==============================================================================+ Package: gf2x Version: 1.3.0-1 Source Version: 1.3.0-1 Distribution: unstable Machine Architecture: amd64 Host Architecture: s390x Build Architecture: amd64 Build Profiles: cross nocheck Build Type: any I: NOTICE: Log filtering will replace 'var/run/schroot/mount/unstable-amd64-sbuild-3e095db6-0db1-4cfb-9173-f2c87bf363f7' with '<>' I: NOTICE: Log filtering will replace 'build/gf2x-FN9zDJ/resolver-YPFFXc' with '<>' +------------------------------------------------------------------------------+ | Update chroot | +------------------------------------------------------------------------------+ Get:1 http://debian.oregonstate.edu/debian unstable InRelease [157 kB] Get:2 http://debian.oregonstate.edu/debian unstable/main Sources.diff/Index [63.6 kB] Get:3 http://debian.oregonstate.edu/debian unstable/main amd64 Packages.diff/Index [63.6 kB] Get:4 http://debian.oregonstate.edu/debian unstable/main Sources T-2021-05-16-2001.03-F-2021-05-16-0800.53.pdiff [5941 B] Get:4 http://debian.oregonstate.edu/debian unstable/main Sources T-2021-05-16-2001.03-F-2021-05-16-0800.53.pdiff [5941 B] Get:5 http://debian.oregonstate.edu/debian unstable/main amd64 Packages T-2021-05-16-2001.03-F-2021-05-16-0800.53.pdiff [6234 B] Get:5 http://debian.oregonstate.edu/debian unstable/main amd64 Packages T-2021-05-16-2001.03-F-2021-05-16-0800.53.pdiff [6234 B] Get:6 http://debian.oregonstate.edu/debian unstable/main s390x Packages [8282 kB] Fetched 8579 kB in 4s (2127 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages will be upgraded: base-passwd 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 58.1 kB of archives. After this operation, 9216 B of additional disk space will be used. Get:1 http://debian.oregonstate.edu/debian unstable/main amd64 base-passwd amd64 3.5.50 [58.1 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 58.1 kB in 0s (4673 kB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10486 files and directories currently installed.) Preparing to unpack .../base-passwd_3.5.50_amd64.deb ... Unpacking base-passwd (3.5.50) over (3.5.49) ... Setting up base-passwd (3.5.50) ... Changing home-directory of irc from /var/run/ircd to /run/ircd 1 changes have been made, rewriting files Writing passwd-file to /etc/passwd Writing shadow-file to /etc/shadow Writing group-file to /etc/group +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Check APT --------- Checking available source versions... Download source files with APT ------------------------------ Reading package lists... NOTICE: 'gf2x' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/science-team/gf2x.git Please use: git clone https://salsa.debian.org/science-team/gf2x.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 732 kB of source archives. Get:1 http://debian.oregonstate.edu/debian unstable/main gf2x 1.3.0-1 (dsc) [1963 B] Get:2 http://debian.oregonstate.edu/debian unstable/main gf2x 1.3.0-1 (tar) [728 kB] Get:3 http://debian.oregonstate.edu/debian unstable/main gf2x 1.3.0-1 (diff) [2552 B] Fetched 732 kB in 0s (13.7 MB/s) Download complete and in download only mode I: NOTICE: Log filtering will replace 'build/gf2x-FN9zDJ/gf2x-1.3.0' with '<>' I: NOTICE: Log filtering will replace 'build/gf2x-FN9zDJ' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper-compat (= 12), libc-dev, libstdc++-dev, build-essential:amd64, fakeroot:amd64, crossbuild-essential-s390x:amd64, libc-dev:s390x, libstdc++-dev:s390x Filtered Build-Depends: debhelper-compat (= 12), libc-dev, libstdc++-dev, build-essential:amd64, fakeroot:amd64, crossbuild-essential-s390x:amd64, libc-dev:s390x, libstdc++-dev:s390x dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [957 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [402 B] Get:5 copy:/<>/apt_archive ./ Packages [492 B] Fetched 1851 B in 0s (72.3 kB/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: autoconf automake autopoint autotools-dev binutils-s390x-linux-gnu bsdextrautils build-essential cpp-10-s390x-linux-gnu cpp-s390x-linux-gnu cross-config crossbuild-essential-s390x debhelper dh-autoreconf dh-strip-nondeterminism dpkg-cross dpkg-dev dwz file g++ g++-10 g++-10-s390x-linux-gnu g++-s390x-linux-gnu gcc-10-base:s390x gcc-10-cross-base gcc-10-s390x-linux-gnu gcc-10-s390x-linux-gnu-base gcc-9-base:s390x gcc-s390x-linux-gnu gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasan5:s390x libasan6-s390x-cross libatomic1:s390x libatomic1-s390x-cross libc6:s390x libc6-dev libc6-dev:s390x libc6-dev-s390x-cross libc6-s390x-cross libcom-err2:s390x libconfig-auto-perl libconfig-inifiles-perl libcrypt-dev libcrypt-dev:s390x libcrypt1:s390x libdebhelper-perl libdebian-dpkgcross-perl libdpkg-perl libelf1 libfile-homedir-perl libfile-stripnondeterminism-perl libfile-which-perl libgcc-10-dev-s390x-cross libgcc-9-dev:s390x libgcc-s1:s390x libgcc-s1-s390x-cross libgomp1:s390x libgomp1-s390x-cross libgssapi-krb5-2:s390x libicu67 libio-string-perl libitm1:s390x libitm1-s390x-cross libk5crypto3:s390x libkeyutils1:s390x libkrb5-3:s390x libkrb5support0:s390x liblocale-gettext-perl libmagic-mgc libmagic1 libnsl-dev libnsl-dev:s390x libnsl2:s390x libperl5.32 libpipeline1 libsigsegv2 libssl1.1:s390x libstdc++-10-dev libstdc++-10-dev-s390x-cross libstdc++-9-dev:s390x libstdc++6:s390x libstdc++6-s390x-cross libsub-override-perl libtirpc-dev libtirpc-dev:s390x libtirpc3:s390x libtool libubsan1:s390x libubsan1-s390x-cross libuchardet0 libxml-libxml-perl libxml-namespacesupport-perl libxml-sax-base-perl libxml-sax-perl libxml-simple-perl libxml2 libyaml-perl linux-libc-dev:s390x linux-libc-dev-s390x-cross m4 man-db perl perl-modules-5.32 po-debconf sensible-utils ucf Suggested packages: autoconf-archive gnu-standards autoconf-doc binutils-doc gcc-10-locales cpp-doc dh-make binutils-multiarch debian-keyring g++-multilib g++-10-multilib gcc-10-doc g++-10-multilib-s390x-linux-gnu gcc-10-multilib-s390x-linux-gnu manpages-dev flex bison gdb-s390x-linux-gnu gcc-doc gettext-doc libasprintf-dev libgettextpo-dev groff glibc-doc:s390x libc-l10n:s390x locales:s390x glibc-doc manpages-dev:s390x gnupg git bzr krb5-doc:s390x krb5-user:s390x libstdc++-10-doc libstdc++-9-doc:s390x libtool-doc gfortran | fortran95-compiler gcj-jdk libyaml-shell-perl m4-doc apparmor less www-browser perl-doc libterm-readline-gnu-perl | libterm-readline-perl-perl libtap-harness-archive-perl libmail-box-perl Recommended packages: gnupg libalgorithm-merge-perl curl | wget | lynx libidn2-0:s390x libnss-nis:s390x libnss-nisplus:s390x libfile-fcntllock-perl libarchive-cpio-perl krb5-locales:s390x libltdl-dev libwww-perl libxml-sax-expat-perl libyaml-libyaml-perl | libyaml-syck-perl netbase libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev binutils-s390x-linux-gnu bsdextrautils build-essential cpp-10-s390x-linux-gnu cpp-s390x-linux-gnu cross-config crossbuild-essential-s390x debhelper dh-autoreconf dh-strip-nondeterminism dpkg-cross dpkg-dev dwz file g++ g++-10 g++-10-s390x-linux-gnu g++-s390x-linux-gnu gcc-10-base:s390x gcc-10-cross-base gcc-10-s390x-linux-gnu gcc-10-s390x-linux-gnu-base gcc-9-base:s390x gcc-s390x-linux-gnu gettext gettext-base groff-base intltool-debian libarchive-zip-perl libasan5:s390x libasan6-s390x-cross libatomic1:s390x libatomic1-s390x-cross libc6:s390x libc6-dev libc6-dev:s390x libc6-dev-s390x-cross libc6-s390x-cross libcom-err2:s390x libconfig-auto-perl libconfig-inifiles-perl libcrypt-dev libcrypt-dev:s390x libcrypt1:s390x libdebhelper-perl libdebian-dpkgcross-perl libdpkg-perl libelf1 libfile-homedir-perl libfile-stripnondeterminism-perl libfile-which-perl libgcc-10-dev-s390x-cross libgcc-9-dev:s390x libgcc-s1:s390x libgcc-s1-s390x-cross libgomp1:s390x libgomp1-s390x-cross libgssapi-krb5-2:s390x libicu67 libio-string-perl libitm1:s390x libitm1-s390x-cross libk5crypto3:s390x libkeyutils1:s390x libkrb5-3:s390x libkrb5support0:s390x liblocale-gettext-perl libmagic-mgc libmagic1 libnsl-dev libnsl-dev:s390x libnsl2:s390x libperl5.32 libpipeline1 libsigsegv2 libssl1.1:s390x libstdc++-10-dev libstdc++-10-dev-s390x-cross libstdc++-9-dev:s390x libstdc++6:s390x libstdc++6-s390x-cross libsub-override-perl libtirpc-dev libtirpc-dev:s390x libtirpc3:s390x libtool libubsan1:s390x libubsan1-s390x-cross libuchardet0 libxml-libxml-perl libxml-namespacesupport-perl libxml-sax-base-perl libxml-sax-perl libxml-simple-perl libxml2 libyaml-perl linux-libc-dev:s390x linux-libc-dev-s390x-cross m4 man-db perl perl-modules-5.32 po-debconf sbuild-build-depends-main-dummy:s390x sensible-utils ucf 0 upgraded, 110 newly installed, 0 to remove and 0 not upgraded. Need to get 201 MB of archives. After this operation, 861 MB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [916 B] Get:2 http://debian.oregonstate.edu/debian unstable/main amd64 bsdextrautils amd64 2.36.1-7 [145 kB] Get:3 http://debian.oregonstate.edu/debian unstable/main amd64 libuchardet0 amd64 0.0.7-1 [67.8 kB] Get:4 http://debian.oregonstate.edu/debian unstable/main amd64 groff-base amd64 1.22.4-6 [936 kB] Get:5 http://debian.oregonstate.edu/debian unstable/main amd64 libpipeline1 amd64 1.5.3-1 [34.3 kB] Get:6 http://debian.oregonstate.edu/debian unstable/main amd64 man-db amd64 2.9.4-2 [1354 kB] Get:7 http://debian.oregonstate.edu/debian unstable/main amd64 perl-modules-5.32 all 5.32.1-4 [2823 kB] Get:8 http://debian.oregonstate.edu/debian unstable/main amd64 libperl5.32 amd64 5.32.1-4 [4117 kB] Get:9 http://debian.oregonstate.edu/debian unstable/main amd64 perl amd64 5.32.1-4 [293 kB] Get:10 http://debian.oregonstate.edu/debian unstable/main amd64 liblocale-gettext-perl amd64 1.07-4+b1 [19.0 kB] Get:11 http://debian.oregonstate.edu/debian unstable/main s390x gcc-10-base s390x 10.2.1-6 [201 kB] Get:12 http://debian.oregonstate.edu/debian unstable/main s390x gcc-9-base s390x 9.3.0-22 [198 kB] Get:13 http://debian.oregonstate.edu/debian unstable/main amd64 sensible-utils all 0.0.14 [14.8 kB] Get:14 http://debian.oregonstate.edu/debian unstable/main amd64 libmagic-mgc amd64 1:5.39-3 [273 kB] Get:15 http://debian.oregonstate.edu/debian unstable/main amd64 libmagic1 amd64 1:5.39-3 [126 kB] Get:16 http://debian.oregonstate.edu/debian unstable/main amd64 file amd64 1:5.39-3 [69.1 kB] Get:17 http://debian.oregonstate.edu/debian unstable/main amd64 gettext-base amd64 0.21-4 [175 kB] Get:18 http://debian.oregonstate.edu/debian unstable/main amd64 ucf all 3.0043 [74.0 kB] Get:19 http://debian.oregonstate.edu/debian unstable/main amd64 libsigsegv2 amd64 2.13-1 [34.8 kB] Get:20 http://debian.oregonstate.edu/debian unstable/main amd64 m4 amd64 1.4.18-5 [204 kB] Get:21 http://debian.oregonstate.edu/debian unstable/main amd64 autoconf all 2.69-14 [313 kB] Get:22 http://debian.oregonstate.edu/debian unstable/main amd64 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get:23 http://debian.oregonstate.edu/debian unstable/main amd64 automake all 1:1.16.3-2 [814 kB] Get:24 http://debian.oregonstate.edu/debian unstable/main amd64 autopoint all 0.21-4 [510 kB] Get:25 http://debian.oregonstate.edu/debian unstable/main amd64 binutils-s390x-linux-gnu amd64 2.35.2-2 [1984 kB] Get:26 http://debian.oregonstate.edu/debian unstable/main amd64 libcrypt-dev amd64 1:4.4.18-4 [104 kB] Get:27 http://debian.oregonstate.edu/debian unstable/main amd64 libtirpc-dev amd64 1.3.1-1 [190 kB] Get:28 http://debian.oregonstate.edu/debian unstable/main amd64 libnsl-dev amd64 1.3.0-2 [66.4 kB] Get:29 http://debian.oregonstate.edu/debian unstable/main amd64 libc6-dev amd64 2.31-12 [2346 kB] Get:30 http://debian.oregonstate.edu/debian unstable/main amd64 libstdc++-10-dev amd64 10.2.1-6 [1741 kB] Get:31 http://debian.oregonstate.edu/debian unstable/main amd64 g++-10 amd64 10.2.1-6 [9380 kB] Get:32 http://debian.oregonstate.edu/debian unstable/main amd64 g++ amd64 4:10.2.1-1 [1644 B] Get:33 http://debian.oregonstate.edu/debian unstable/main amd64 libdpkg-perl all 1.20.9 [1537 kB] Get:34 http://debian.oregonstate.edu/debian unstable/main amd64 dpkg-dev all 1.20.9 [2153 kB] Get:35 http://debian.oregonstate.edu/debian unstable/main amd64 build-essential amd64 12.9 [7704 B] Get:36 http://debian.oregonstate.edu/debian unstable/main amd64 gcc-10-s390x-linux-gnu-base amd64 10.2.1-6cross1 [202 kB] Get:37 http://debian.oregonstate.edu/debian unstable/main amd64 cpp-10-s390x-linux-gnu amd64 10.2.1-6cross1 [41.1 MB] Get:38 http://debian.oregonstate.edu/debian unstable/main amd64 cpp-s390x-linux-gnu amd64 4:10.2.1-1 [16.8 kB] Get:39 http://debian.oregonstate.edu/debian unstable/main amd64 cross-config all 2.6.18+nmu1 [31.5 kB] Get:40 http://debian.oregonstate.edu/debian unstable/main amd64 gcc-10-cross-base all 10.2.1-6cross1 [197 kB] Get:41 http://debian.oregonstate.edu/debian unstable/main amd64 libc6-s390x-cross all 2.31-9cross4 [1231 kB] Get:42 http://debian.oregonstate.edu/debian unstable/main amd64 libgcc-s1-s390x-cross all 10.2.1-6cross1 [24.6 kB] Get:43 http://debian.oregonstate.edu/debian unstable/main amd64 libgomp1-s390x-cross all 10.2.1-6cross1 [90.5 kB] Get:44 http://debian.oregonstate.edu/debian unstable/main amd64 libitm1-s390x-cross all 10.2.1-6cross1 [24.9 kB] Get:45 http://debian.oregonstate.edu/debian unstable/main amd64 libatomic1-s390x-cross all 10.2.1-6cross1 [7944 B] Get:46 http://debian.oregonstate.edu/debian unstable/main amd64 libasan6-s390x-cross all 10.2.1-6cross1 [1863 kB] Get:47 http://debian.oregonstate.edu/debian unstable/main amd64 libstdc++6-s390x-cross all 10.2.1-6cross1 [442 kB] Get:48 http://debian.oregonstate.edu/debian unstable/main amd64 libubsan1-s390x-cross all 10.2.1-6cross1 [747 kB] Get:49 http://debian.oregonstate.edu/debian unstable/main amd64 libgcc-10-dev-s390x-cross all 10.2.1-6cross1 [663 kB] Get:50 http://debian.oregonstate.edu/debian unstable/main amd64 gcc-10-s390x-linux-gnu amd64 10.2.1-6cross1 [46.3 MB] Get:51 http://debian.oregonstate.edu/debian unstable/main amd64 gcc-s390x-linux-gnu amd64 4:10.2.1-1 [1456 B] Get:52 http://debian.oregonstate.edu/debian unstable/main amd64 linux-libc-dev-s390x-cross all 5.10.13-1cross4 [1395 kB] Get:53 http://debian.oregonstate.edu/debian unstable/main amd64 libc6-dev-s390x-cross all 2.31-9cross4 [1943 kB] Get:54 http://debian.oregonstate.edu/debian unstable/main amd64 libstdc++-10-dev-s390x-cross all 10.2.1-6cross1 [1684 kB] Get:55 http://debian.oregonstate.edu/debian unstable/main amd64 g++-10-s390x-linux-gnu amd64 10.2.1-6cross1 [44.2 MB] Get:56 http://debian.oregonstate.edu/debian unstable/main amd64 g++-s390x-linux-gnu amd64 4:10.2.1-1 [1176 B] Get:57 http://debian.oregonstate.edu/debian unstable/main amd64 libconfig-inifiles-perl all 3.000003-1 [52.1 kB] Get:58 http://debian.oregonstate.edu/debian unstable/main amd64 libio-string-perl all 1.08-3.1 [11.8 kB] Get:59 http://debian.oregonstate.edu/debian unstable/main amd64 libicu67 amd64 67.1-6 [8625 kB] Get:60 http://debian.oregonstate.edu/debian unstable/main amd64 libxml2 amd64 2.9.10+dfsg-6.6 [692 kB] Get:61 http://debian.oregonstate.edu/debian unstable/main amd64 libxml-namespacesupport-perl all 1.12-1.1 [14.9 kB] Get:62 http://debian.oregonstate.edu/debian unstable/main amd64 libxml-sax-base-perl all 1.09-1.1 [20.7 kB] Get:63 http://debian.oregonstate.edu/debian unstable/main amd64 libxml-sax-perl all 1.02+dfsg-1 [59.0 kB] Get:64 http://debian.oregonstate.edu/debian unstable/main amd64 libxml-libxml-perl amd64 2.0134+dfsg-2+b1 [337 kB] Get:65 http://debian.oregonstate.edu/debian unstable/main amd64 libxml-simple-perl all 2.25-1 [72.0 kB] Get:66 http://debian.oregonstate.edu/debian unstable/main amd64 libyaml-perl all 1.30-1 [67.7 kB] Get:67 http://debian.oregonstate.edu/debian unstable/main amd64 libconfig-auto-perl all 0.44-1.1 [19.0 kB] Get:68 http://debian.oregonstate.edu/debian unstable/main amd64 libfile-which-perl all 1.23-1 [16.6 kB] Get:69 http://debian.oregonstate.edu/debian unstable/main amd64 libfile-homedir-perl all 1.006-1 [43.8 kB] Get:70 http://debian.oregonstate.edu/debian unstable/main amd64 libdebian-dpkgcross-perl all 2.6.18+nmu1 [30.5 kB] Get:71 http://debian.oregonstate.edu/debian unstable/main amd64 dpkg-cross all 2.6.18+nmu1 [41.6 kB] Get:72 http://debian.oregonstate.edu/debian unstable/main amd64 crossbuild-essential-s390x all 12.9 [6704 B] Get:73 http://debian.oregonstate.edu/debian unstable/main amd64 libdebhelper-perl all 13.3.4 [189 kB] Get:74 http://debian.oregonstate.edu/debian unstable/main amd64 libtool all 2.4.6-15 [513 kB] Get:75 http://debian.oregonstate.edu/debian unstable/main amd64 dh-autoreconf all 20 [17.1 kB] Get:76 http://debian.oregonstate.edu/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get:77 http://debian.oregonstate.edu/debian unstable/main amd64 libsub-override-perl all 0.09-2 [10.2 kB] Get:78 http://debian.oregonstate.edu/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get:79 http://debian.oregonstate.edu/debian unstable/main amd64 dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get:80 http://debian.oregonstate.edu/debian unstable/main amd64 libelf1 amd64 0.183-3 [165 kB] Get:81 http://debian.oregonstate.edu/debian unstable/main amd64 dwz amd64 0.14-1 [98.3 kB] Get:82 http://debian.oregonstate.edu/debian unstable/main amd64 gettext amd64 0.21-4 [1311 kB] Get:83 http://debian.oregonstate.edu/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get:84 http://debian.oregonstate.edu/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get:85 http://debian.oregonstate.edu/debian unstable/main amd64 debhelper all 13.3.4 [1049 kB] Get:86 http://debian.oregonstate.edu/debian unstable/main s390x libgcc-s1 s390x 10.2.1-6 [24.6 kB] Get:87 http://debian.oregonstate.edu/debian unstable/main s390x libcrypt1 s390x 1:4.4.18-4 [87.9 kB] Get:88 http://debian.oregonstate.edu/debian unstable/main s390x libc6 s390x 2.31-12 [2446 kB] Get:89 http://debian.oregonstate.edu/debian unstable/main s390x libasan5 s390x 9.3.0-22 [344 kB] Get:90 http://debian.oregonstate.edu/debian unstable/main s390x libatomic1 s390x 10.2.1-6 [8124 B] Get:91 http://debian.oregonstate.edu/debian unstable/main s390x linux-libc-dev s390x 5.10.28-1 [1318 kB] Get:92 http://debian.oregonstate.edu/debian unstable/main s390x libcrypt-dev s390x 1:4.4.18-4 [105 kB] Get:93 http://debian.oregonstate.edu/debian unstable/main s390x libcom-err2 s390x 1.46.2-1 [73.9 kB] Get:94 http://debian.oregonstate.edu/debian unstable/main s390x libkrb5support0 s390x 1.18.3-5 [64.3 kB] Get:95 http://debian.oregonstate.edu/debian unstable/main s390x libk5crypto3 s390x 1.18.3-5 [112 kB] Get:96 http://debian.oregonstate.edu/debian unstable/main s390x libkeyutils1 s390x 1.6.1-2 [15.2 kB] Get:97 http://debian.oregonstate.edu/debian unstable/main s390x libssl1.1 s390x 1.1.1k-1 [1213 kB] Get:98 http://debian.oregonstate.edu/debian unstable/main s390x libkrb5-3 s390x 1.18.3-5 [342 kB] Get:99 http://debian.oregonstate.edu/debian unstable/main s390x libgssapi-krb5-2 s390x 1.18.3-5 [153 kB] Get:100 http://debian.oregonstate.edu/debian unstable/main s390x libtirpc3 s390x 1.3.1-1 [77.8 kB] Get:101 http://debian.oregonstate.edu/debian unstable/main s390x libnsl2 s390x 1.3.0-2 [37.3 kB] Get:102 http://debian.oregonstate.edu/debian unstable/main s390x libtirpc-dev s390x 1.3.1-1 [185 kB] Get:103 http://debian.oregonstate.edu/debian unstable/main s390x libnsl-dev s390x 1.3.0-2 [64.6 kB] Get:104 http://debian.oregonstate.edu/debian unstable/main s390x libc6-dev s390x 2.31-12 [1971 kB] Get:105 http://debian.oregonstate.edu/debian unstable/main s390x libgomp1 s390x 10.2.1-6 [92.4 kB] Get:106 http://debian.oregonstate.edu/debian unstable/main s390x libitm1 s390x 10.2.1-6 [25.3 kB] Get:107 http://debian.oregonstate.edu/debian unstable/main s390x libstdc++6 s390x 10.2.1-6 [484 kB] Get:108 http://debian.oregonstate.edu/debian unstable/main s390x libubsan1 s390x 10.2.1-6 [748 kB] Get:109 http://debian.oregonstate.edu/debian unstable/main s390x libgcc-9-dev s390x 9.3.0-22 [681 kB] Get:110 http://debian.oregonstate.edu/debian unstable/main s390x libstdc++-9-dev s390x 9.3.0-22 [1669 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 201 MB in 2s (130 MB/s) Selecting previously unselected package bsdextrautils. (Reading database ... 10486 files and directories currently installed.) Preparing to unpack .../000-bsdextrautils_2.36.1-7_amd64.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../001-libuchardet0_0.0.7-1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../002-groff-base_1.22.4-6_amd64.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../003-libpipeline1_1.5.3-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../004-man-db_2.9.4-2_amd64.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package perl-modules-5.32. Preparing to unpack .../005-perl-modules-5.32_5.32.1-4_all.deb ... Unpacking perl-modules-5.32 (5.32.1-4) ... Selecting previously unselected package libperl5.32:amd64. Preparing to unpack .../006-libperl5.32_5.32.1-4_amd64.deb ... Unpacking libperl5.32:amd64 (5.32.1-4) ... Selecting previously unselected package perl. Preparing to unpack .../007-perl_5.32.1-4_amd64.deb ... Unpacking perl (5.32.1-4) ... Selecting previously unselected package liblocale-gettext-perl. Preparing to unpack .../008-liblocale-gettext-perl_1.07-4+b1_amd64.deb ... Unpacking liblocale-gettext-perl (1.07-4+b1) ... Selecting previously unselected package gcc-10-base:s390x. Preparing to unpack .../009-gcc-10-base_10.2.1-6_s390x.deb ... Unpacking gcc-10-base:s390x (10.2.1-6) ... Selecting previously unselected package gcc-9-base:s390x. Preparing to unpack .../010-gcc-9-base_9.3.0-22_s390x.deb ... Unpacking gcc-9-base:s390x (9.3.0-22) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../011-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../012-libmagic-mgc_1%3a5.39-3_amd64.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:amd64. Preparing to unpack .../013-libmagic1_1%3a5.39-3_amd64.deb ... Unpacking libmagic1:amd64 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../014-file_1%3a5.39-3_amd64.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../015-gettext-base_0.21-4_amd64.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package ucf. Preparing to unpack .../016-ucf_3.0043_all.deb ... Moving old data out of the way Unpacking ucf (3.0043) ... Selecting previously unselected package libsigsegv2:amd64. Preparing to unpack .../017-libsigsegv2_2.13-1_amd64.deb ... Unpacking libsigsegv2:amd64 (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../018-m4_1.4.18-5_amd64.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../019-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../020-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../021-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../022-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package binutils-s390x-linux-gnu. Preparing to unpack .../023-binutils-s390x-linux-gnu_2.35.2-2_amd64.deb ... Unpacking binutils-s390x-linux-gnu (2.35.2-2) ... Selecting previously unselected package libcrypt-dev:amd64. Preparing to unpack .../024-libcrypt-dev_1%3a4.4.18-4_amd64.deb ... Unpacking libcrypt-dev:amd64 (1:4.4.18-4) ... Selecting previously unselected package libtirpc-dev:amd64. Preparing to unpack .../025-libtirpc-dev_1.3.1-1_amd64.deb ... Unpacking libtirpc-dev:amd64 (1.3.1-1) ... Selecting previously unselected package libnsl-dev:amd64. Preparing to unpack .../026-libnsl-dev_1.3.0-2_amd64.deb ... Unpacking libnsl-dev:amd64 (1.3.0-2) ... Selecting previously unselected package libc6-dev:amd64. Preparing to unpack .../027-libc6-dev_2.31-12_amd64.deb ... Unpacking libc6-dev:amd64 (2.31-12) ... Selecting previously unselected package libstdc++-10-dev:amd64. Preparing to unpack .../028-libstdc++-10-dev_10.2.1-6_amd64.deb ... Unpacking libstdc++-10-dev:amd64 (10.2.1-6) ... Selecting previously unselected package g++-10. Preparing to unpack .../029-g++-10_10.2.1-6_amd64.deb ... Unpacking g++-10 (10.2.1-6) ... Selecting previously unselected package g++. Preparing to unpack .../030-g++_4%3a10.2.1-1_amd64.deb ... Unpacking g++ (4:10.2.1-1) ... Selecting previously unselected package libdpkg-perl. Preparing to unpack .../031-libdpkg-perl_1.20.9_all.deb ... Unpacking libdpkg-perl (1.20.9) ... Selecting previously unselected package dpkg-dev. Preparing to unpack .../032-dpkg-dev_1.20.9_all.deb ... Unpacking dpkg-dev (1.20.9) ... Selecting previously unselected package build-essential. Preparing to unpack .../033-build-essential_12.9_amd64.deb ... Unpacking build-essential (12.9) ... Selecting previously unselected package gcc-10-s390x-linux-gnu-base:amd64. Preparing to unpack .../034-gcc-10-s390x-linux-gnu-base_10.2.1-6cross1_amd64.deb ... Unpacking gcc-10-s390x-linux-gnu-base:amd64 (10.2.1-6cross1) ... Selecting previously unselected package cpp-10-s390x-linux-gnu. Preparing to unpack .../035-cpp-10-s390x-linux-gnu_10.2.1-6cross1_amd64.deb ... Unpacking cpp-10-s390x-linux-gnu (10.2.1-6cross1) ... Selecting previously unselected package cpp-s390x-linux-gnu. Preparing to unpack .../036-cpp-s390x-linux-gnu_4%3a10.2.1-1_amd64.deb ... Unpacking cpp-s390x-linux-gnu (4:10.2.1-1) ... Selecting previously unselected package cross-config. Preparing to unpack .../037-cross-config_2.6.18+nmu1_all.deb ... Unpacking cross-config (2.6.18+nmu1) ... Selecting previously unselected package gcc-10-cross-base. Preparing to unpack .../038-gcc-10-cross-base_10.2.1-6cross1_all.deb ... Unpacking gcc-10-cross-base (10.2.1-6cross1) ... Selecting previously unselected package libc6-s390x-cross. Preparing to unpack .../039-libc6-s390x-cross_2.31-9cross4_all.deb ... Unpacking libc6-s390x-cross (2.31-9cross4) ... Selecting previously unselected package libgcc-s1-s390x-cross. Preparing to unpack .../040-libgcc-s1-s390x-cross_10.2.1-6cross1_all.deb ... Unpacking libgcc-s1-s390x-cross (10.2.1-6cross1) ... Selecting previously unselected package libgomp1-s390x-cross. Preparing to unpack .../041-libgomp1-s390x-cross_10.2.1-6cross1_all.deb ... Unpacking libgomp1-s390x-cross (10.2.1-6cross1) ... Selecting previously unselected package libitm1-s390x-cross. Preparing to unpack .../042-libitm1-s390x-cross_10.2.1-6cross1_all.deb ... Unpacking libitm1-s390x-cross (10.2.1-6cross1) ... Selecting previously unselected package libatomic1-s390x-cross. Preparing to unpack .../043-libatomic1-s390x-cross_10.2.1-6cross1_all.deb ... Unpacking libatomic1-s390x-cross (10.2.1-6cross1) ... Selecting previously unselected package libasan6-s390x-cross. Preparing to unpack .../044-libasan6-s390x-cross_10.2.1-6cross1_all.deb ... Unpacking libasan6-s390x-cross (10.2.1-6cross1) ... Selecting previously unselected package libstdc++6-s390x-cross. Preparing to unpack .../045-libstdc++6-s390x-cross_10.2.1-6cross1_all.deb ... Unpacking libstdc++6-s390x-cross (10.2.1-6cross1) ... Selecting previously unselected package libubsan1-s390x-cross. Preparing to unpack .../046-libubsan1-s390x-cross_10.2.1-6cross1_all.deb ... Unpacking libubsan1-s390x-cross (10.2.1-6cross1) ... Selecting previously unselected package libgcc-10-dev-s390x-cross. Preparing to unpack .../047-libgcc-10-dev-s390x-cross_10.2.1-6cross1_all.deb ... Unpacking libgcc-10-dev-s390x-cross (10.2.1-6cross1) ... Selecting previously unselected package gcc-10-s390x-linux-gnu. Preparing to unpack .../048-gcc-10-s390x-linux-gnu_10.2.1-6cross1_amd64.deb ... Unpacking gcc-10-s390x-linux-gnu (10.2.1-6cross1) ... Selecting previously unselected package gcc-s390x-linux-gnu. Preparing to unpack .../049-gcc-s390x-linux-gnu_4%3a10.2.1-1_amd64.deb ... Unpacking gcc-s390x-linux-gnu (4:10.2.1-1) ... Selecting previously unselected package linux-libc-dev-s390x-cross. Preparing to unpack .../050-linux-libc-dev-s390x-cross_5.10.13-1cross4_all.deb ... Unpacking linux-libc-dev-s390x-cross (5.10.13-1cross4) ... Selecting previously unselected package libc6-dev-s390x-cross. Preparing to unpack .../051-libc6-dev-s390x-cross_2.31-9cross4_all.deb ... Unpacking libc6-dev-s390x-cross (2.31-9cross4) ... Selecting previously unselected package libstdc++-10-dev-s390x-cross. Preparing to unpack .../052-libstdc++-10-dev-s390x-cross_10.2.1-6cross1_all.deb ... Unpacking libstdc++-10-dev-s390x-cross (10.2.1-6cross1) ... Selecting previously unselected package g++-10-s390x-linux-gnu. Preparing to unpack .../053-g++-10-s390x-linux-gnu_10.2.1-6cross1_amd64.deb ... Unpacking g++-10-s390x-linux-gnu (10.2.1-6cross1) ... Selecting previously unselected package g++-s390x-linux-gnu. Preparing to unpack .../054-g++-s390x-linux-gnu_4%3a10.2.1-1_amd64.deb ... Unpacking g++-s390x-linux-gnu (4:10.2.1-1) ... Selecting previously unselected package libconfig-inifiles-perl. Preparing to unpack .../055-libconfig-inifiles-perl_3.000003-1_all.deb ... Unpacking libconfig-inifiles-perl (3.000003-1) ... Selecting previously unselected package libio-string-perl. Preparing to unpack .../056-libio-string-perl_1.08-3.1_all.deb ... Unpacking libio-string-perl (1.08-3.1) ... Selecting previously unselected package libicu67:amd64. Preparing to unpack .../057-libicu67_67.1-6_amd64.deb ... Unpacking libicu67:amd64 (67.1-6) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../058-libxml2_2.9.10+dfsg-6.6_amd64.deb ... Unpacking libxml2:amd64 (2.9.10+dfsg-6.6) ... Selecting previously unselected package libxml-namespacesupport-perl. Preparing to unpack .../059-libxml-namespacesupport-perl_1.12-1.1_all.deb ... Unpacking libxml-namespacesupport-perl (1.12-1.1) ... Selecting previously unselected package libxml-sax-base-perl. Preparing to unpack .../060-libxml-sax-base-perl_1.09-1.1_all.deb ... Unpacking libxml-sax-base-perl (1.09-1.1) ... Selecting previously unselected package libxml-sax-perl. Preparing to unpack .../061-libxml-sax-perl_1.02+dfsg-1_all.deb ... Unpacking libxml-sax-perl (1.02+dfsg-1) ... Selecting previously unselected package libxml-libxml-perl. Preparing to unpack .../062-libxml-libxml-perl_2.0134+dfsg-2+b1_amd64.deb ... Unpacking libxml-libxml-perl (2.0134+dfsg-2+b1) ... Selecting previously unselected package libxml-simple-perl. Preparing to unpack .../063-libxml-simple-perl_2.25-1_all.deb ... Unpacking libxml-simple-perl (2.25-1) ... Selecting previously unselected package libyaml-perl. Preparing to unpack .../064-libyaml-perl_1.30-1_all.deb ... Unpacking libyaml-perl (1.30-1) ... Selecting previously unselected package libconfig-auto-perl. Preparing to unpack .../065-libconfig-auto-perl_0.44-1.1_all.deb ... Unpacking libconfig-auto-perl (0.44-1.1) ... Selecting previously unselected package libfile-which-perl. Preparing to unpack .../066-libfile-which-perl_1.23-1_all.deb ... Unpacking libfile-which-perl (1.23-1) ... Selecting previously unselected package libfile-homedir-perl. Preparing to unpack .../067-libfile-homedir-perl_1.006-1_all.deb ... Unpacking libfile-homedir-perl (1.006-1) ... Selecting previously unselected package libdebian-dpkgcross-perl. Preparing to unpack .../068-libdebian-dpkgcross-perl_2.6.18+nmu1_all.deb ... Unpacking libdebian-dpkgcross-perl (2.6.18+nmu1) ... Selecting previously unselected package dpkg-cross. Preparing to unpack .../069-dpkg-cross_2.6.18+nmu1_all.deb ... Unpacking dpkg-cross (2.6.18+nmu1) ... Selecting previously unselected package crossbuild-essential-s390x. Preparing to unpack .../070-crossbuild-essential-s390x_12.9_all.deb ... Unpacking crossbuild-essential-s390x (12.9) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../071-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../072-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../073-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../074-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../075-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../076-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../077-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:amd64. Preparing to unpack .../078-libelf1_0.183-3_amd64.deb ... Unpacking libelf1:amd64 (0.183-3) ... Selecting previously unselected package dwz. Preparing to unpack .../079-dwz_0.14-1_amd64.deb ... Unpacking dwz (0.14-1) ... Selecting previously unselected package gettext. Preparing to unpack .../080-gettext_0.21-4_amd64.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../081-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../082-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../083-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package libgcc-s1:s390x. Preparing to unpack .../084-libgcc-s1_10.2.1-6_s390x.deb ... Unpacking libgcc-s1:s390x (10.2.1-6) ... Selecting previously unselected package libcrypt1:s390x. Preparing to unpack .../085-libcrypt1_1%3a4.4.18-4_s390x.deb ... Unpacking libcrypt1:s390x (1:4.4.18-4) ... Selecting previously unselected package libc6:s390x. Preparing to unpack .../086-libc6_2.31-12_s390x.deb ... Unpacking libc6:s390x (2.31-12) ... Selecting previously unselected package libasan5:s390x. Preparing to unpack .../087-libasan5_9.3.0-22_s390x.deb ... Unpacking libasan5:s390x (9.3.0-22) ... Selecting previously unselected package libatomic1:s390x. Preparing to unpack .../088-libatomic1_10.2.1-6_s390x.deb ... Unpacking libatomic1:s390x (10.2.1-6) ... Selecting previously unselected package linux-libc-dev:s390x. Preparing to unpack .../089-linux-libc-dev_5.10.28-1_s390x.deb ... Unpacking linux-libc-dev:s390x (5.10.28-1) ... Selecting previously unselected package libcrypt-dev:s390x. Preparing to unpack .../090-libcrypt-dev_1%3a4.4.18-4_s390x.deb ... Unpacking libcrypt-dev:s390x (1:4.4.18-4) ... Selecting previously unselected package libcom-err2:s390x. Preparing to unpack .../091-libcom-err2_1.46.2-1_s390x.deb ... Unpacking libcom-err2:s390x (1.46.2-1) ... Selecting previously unselected package libkrb5support0:s390x. Preparing to unpack .../092-libkrb5support0_1.18.3-5_s390x.deb ... Unpacking libkrb5support0:s390x (1.18.3-5) ... Selecting previously unselected package libk5crypto3:s390x. Preparing to unpack .../093-libk5crypto3_1.18.3-5_s390x.deb ... Unpacking libk5crypto3:s390x (1.18.3-5) ... Selecting previously unselected package libkeyutils1:s390x. Preparing to unpack .../094-libkeyutils1_1.6.1-2_s390x.deb ... Unpacking libkeyutils1:s390x (1.6.1-2) ... Selecting previously unselected package libssl1.1:s390x. Preparing to unpack .../095-libssl1.1_1.1.1k-1_s390x.deb ... Unpacking libssl1.1:s390x (1.1.1k-1) ... Selecting previously unselected package libkrb5-3:s390x. Preparing to unpack .../096-libkrb5-3_1.18.3-5_s390x.deb ... Unpacking libkrb5-3:s390x (1.18.3-5) ... Selecting previously unselected package libgssapi-krb5-2:s390x. Preparing to unpack .../097-libgssapi-krb5-2_1.18.3-5_s390x.deb ... Unpacking libgssapi-krb5-2:s390x (1.18.3-5) ... Selecting previously unselected package libtirpc3:s390x. Preparing to unpack .../098-libtirpc3_1.3.1-1_s390x.deb ... Unpacking libtirpc3:s390x (1.3.1-1) ... Selecting previously unselected package libnsl2:s390x. Preparing to unpack .../099-libnsl2_1.3.0-2_s390x.deb ... Unpacking libnsl2:s390x (1.3.0-2) ... Selecting previously unselected package libtirpc-dev:s390x. Preparing to unpack .../100-libtirpc-dev_1.3.1-1_s390x.deb ... Unpacking libtirpc-dev:s390x (1.3.1-1) ... Selecting previously unselected package libnsl-dev:s390x. Preparing to unpack .../101-libnsl-dev_1.3.0-2_s390x.deb ... Unpacking libnsl-dev:s390x (1.3.0-2) ... Selecting previously unselected package libc6-dev:s390x. Preparing to unpack .../102-libc6-dev_2.31-12_s390x.deb ... Unpacking libc6-dev:s390x (2.31-12) ... Selecting previously unselected package libgomp1:s390x. Preparing to unpack .../103-libgomp1_10.2.1-6_s390x.deb ... Unpacking libgomp1:s390x (10.2.1-6) ... Selecting previously unselected package libitm1:s390x. Preparing to unpack .../104-libitm1_10.2.1-6_s390x.deb ... Unpacking libitm1:s390x (10.2.1-6) ... Selecting previously unselected package libstdc++6:s390x. Preparing to unpack .../105-libstdc++6_10.2.1-6_s390x.deb ... Unpacking libstdc++6:s390x (10.2.1-6) ... Selecting previously unselected package libubsan1:s390x. Preparing to unpack .../106-libubsan1_10.2.1-6_s390x.deb ... Unpacking libubsan1:s390x (10.2.1-6) ... Selecting previously unselected package libgcc-9-dev:s390x. Preparing to unpack .../107-libgcc-9-dev_9.3.0-22_s390x.deb ... Unpacking libgcc-9-dev:s390x (9.3.0-22) ... Selecting previously unselected package libstdc++-9-dev:s390x. Preparing to unpack .../108-libstdc++-9-dev_9.3.0-22_s390x.deb ... Unpacking libstdc++-9-dev:s390x (9.3.0-22) ... Selecting previously unselected package sbuild-build-depends-main-dummy:s390x. Preparing to unpack .../109-sbuild-build-depends-main-dummy_0.invalid.0_s390x.deb ... Unpacking sbuild-build-depends-main-dummy:s390x (0.invalid.0) ... Setting up libconfig-inifiles-perl (3.000003-1) ... Setting up libpipeline1:amd64 (1.5.3-1) ... Setting up binutils-s390x-linux-gnu (2.35.2-2) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:amd64 (67.1-6) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up perl-modules-5.32 (5.32.1-4) ... Setting up libc6-s390x-cross (2.31-9cross4) ... Setting up libmagic1:amd64 (1:5.39-3) ... Setting up linux-libc-dev:s390x (5.10.28-1) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up gcc-10-base:s390x (10.2.1-6) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up linux-libc-dev-s390x-cross (5.10.13-1cross4) ... Setting up cross-config (2.6.18+nmu1) ... Setting up libtirpc-dev:amd64 (1.3.1-1) ... Setting up libsigsegv2:amd64 (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up libperl5.32:amd64 (5.32.1-4) ... Setting up gcc-10-cross-base (10.2.1-6cross1) ... Setting up libitm1-s390x-cross (10.2.1-6cross1) ... Setting up libnsl-dev:amd64 (1.3.0-2) ... Setting up sensible-utils (0.0.14) ... Setting up libc6-dev-s390x-cross (2.31-9cross4) ... Setting up libcrypt-dev:amd64 (1:4.4.18-4) ... Setting up libuchardet0:amd64 (0.0.7-1) ... Setting up libc6-dev:amd64 (2.31-12) ... Setting up libelf1:amd64 (0.183-3) ... Setting up libgomp1-s390x-cross (10.2.1-6cross1) ... Setting up libxml2:amd64 (2.9.10+dfsg-6.6) ... Setting up gcc-10-s390x-linux-gnu-base:amd64 (10.2.1-6cross1) ... Setting up liblocale-gettext-perl (1.07-4+b1) ... Setting up gcc-9-base:s390x (9.3.0-22) ... Setting up gettext (0.21-4) ... Setting up libstdc++-10-dev:amd64 (10.2.1-6) ... Setting up g++-10 (10.2.1-6) ... Setting up libtool (2.4.6-15) ... Setting up libatomic1-s390x-cross (10.2.1-6cross1) ... Setting up m4 (1.4.18-5) ... Setting up perl (5.32.1-4) ... Setting up libgcc-s1-s390x-cross (10.2.1-6cross1) ... Setting up ucf (3.0043) ... Setting up libdpkg-perl (1.20.9) ... Setting up autoconf (2.69-14) ... Setting up g++ (4:10.2.1-1) ... update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode Setting up dwz (0.14-1) ... Setting up groff-base (1.22.4-6) ... Setting up cpp-10-s390x-linux-gnu (10.2.1-6cross1) ... Setting up libsub-override-perl (0.09-2) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-which-perl (1.23-1) ... Setting up cpp-s390x-linux-gnu (4:10.2.1-1) ... Setting up libstdc++6-s390x-cross (10.2.1-6cross1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libxml-namespacesupport-perl (1.12-1.1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libyaml-perl (1.30-1) ... Setting up libasan6-s390x-cross (10.2.1-6cross1) ... Setting up dpkg-dev (1.20.9) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up dh-autoreconf (20) ... Setting up libxml-sax-base-perl (1.09-1.1) ... Setting up libio-string-perl (1.08-3.1) ... Setting up build-essential (12.9) ... Setting up libfile-homedir-perl (1.006-1) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up libubsan1-s390x-cross (10.2.1-6cross1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libxml-sax-perl (1.02+dfsg-1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::PurePerl with priority 10... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Creating config file /etc/perl/XML/SAX/ParserDetails.ini with new version Setting up libgcc-10-dev-s390x-cross (10.2.1-6cross1) ... Setting up libxml-libxml-perl (2.0134+dfsg-2+b1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX::Parser with priority 50... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX with priority 50... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up libstdc++-10-dev-s390x-cross (10.2.1-6cross1) ... Setting up debhelper (13.3.4) ... Setting up gcc-10-s390x-linux-gnu (10.2.1-6cross1) ... Setting up gcc-s390x-linux-gnu (4:10.2.1-1) ... Setting up libxml-simple-perl (2.25-1) ... Setting up g++-10-s390x-linux-gnu (10.2.1-6cross1) ... Setting up g++-s390x-linux-gnu (4:10.2.1-1) ... Setting up libconfig-auto-perl (0.44-1.1) ... Setting up libdebian-dpkgcross-perl (2.6.18+nmu1) ... Setting up dpkg-cross (2.6.18+nmu1) ... Setting up crossbuild-essential-s390x (12.9) ... Setting up libcrypt1:s390x (1:4.4.18-4) ... Setting up libgcc-s1:s390x (10.2.1-6) ... Setting up libc6:s390x (2.31-12) ... Setting up libcrypt-dev:s390x (1:4.4.18-4) ... Setting up libstdc++6:s390x (10.2.1-6) ... Setting up libitm1:s390x (10.2.1-6) ... Setting up libkeyutils1:s390x (1.6.1-2) ... Setting up libssl1.1:s390x (1.1.1k-1) ... Setting up libcom-err2:s390x (1.46.2-1) ... Setting up libgomp1:s390x (10.2.1-6) ... Setting up libkrb5support0:s390x (1.18.3-5) ... Setting up libasan5:s390x (9.3.0-22) ... Setting up libatomic1:s390x (10.2.1-6) ... Setting up libk5crypto3:s390x (1.18.3-5) ... Setting up libubsan1:s390x (10.2.1-6) ... Setting up libkrb5-3:s390x (1.18.3-5) ... Setting up libgcc-9-dev:s390x (9.3.0-22) ... Setting up libgssapi-krb5-2:s390x (1.18.3-5) ... Setting up libtirpc3:s390x (1.3.1-1) ... Setting up libtirpc-dev:s390x (1.3.1-1) ... Setting up libnsl2:s390x (1.3.0-2) ... Setting up libnsl-dev:s390x (1.3.0-2) ... Setting up libc6-dev:s390x (2.31-12) ... Setting up libstdc++-9-dev:s390x (9.3.0-22) ... Setting up sbuild-build-depends-main-dummy:s390x (0.invalid.0) ... Processing triggers for libc-bin (2.31-12) ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Arch check ok (s390x included in any) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 4.19.0-16-amd64 #1 SMP Debian 4.19.181-1 (2021-03-19) amd64 (x86_64) Toolchain package versions: binutils_2.35.2-2 dpkg-dev_1.20.9 g++-10_10.2.1-6 gcc-10_10.2.1-6 libc6-dev_2.31-12 libstdc++-10-dev_10.2.1-6 libstdc++-10-dev-s390x-cross_10.2.1-6cross1 libstdc++-9-dev_9.3.0-22 libstdc++6_10.2.1-6 libstdc++6-s390x-cross_10.2.1-6cross1 linux-libc-dev_5.10.28-1 Package versions: adduser_3.118 apt_2.2.3 autoconf_2.69-14 automake_1:1.16.3-2 autopoint_0.21-4 autotools-dev_20180224.1+nmu1 base-files_11.1 base-passwd_3.5.50 bash_5.1-3 binutils_2.35.2-2 binutils-common_2.35.2-2 binutils-s390x-linux-gnu_2.35.2-2 binutils-x86-64-linux-gnu_2.35.2-2 bsdextrautils_2.36.1-7 bsdutils_1:2.36.1-7 build-essential_12.9 bzip2_1.0.8-4 coreutils_8.32-4+b1 cpp_4:10.2.1-1 cpp-10_10.2.1-6 cpp-10-s390x-linux-gnu_10.2.1-6cross1 cpp-8_8.4.0-7 cpp-s390x-linux-gnu_4:10.2.1-1 cross-config_2.6.18+nmu1 crossbuild-essential-s390x_12.9 dash_0.5.11+git20210120+802ebd4-1 debconf_1.5.76 debhelper_13.3.4 debian-archive-keyring_2021.1.1 debianutils_4.11.2 dh-autoreconf_20 dh-strip-nondeterminism_1.12.0-1 diffutils_1:3.7-5 dpkg_1.20.9 dpkg-cross_2.6.18+nmu1 dpkg-dev_1.20.9 dwz_0.14-1 e2fsprogs_1.46.2-1 fakeroot_1.25.3-1.1 fdisk_2.36.1-7 file_1:5.39-3 findutils_4.8.0-1 g++_4:10.2.1-1 g++-10_10.2.1-6 g++-10-s390x-linux-gnu_10.2.1-6cross1 g++-s390x-linux-gnu_4:10.2.1-1 gcc_4:10.2.1-1 gcc-10_10.2.1-6 gcc-10-base_10.2.1-6 gcc-10-cross-base_10.2.1-6cross1 gcc-10-s390x-linux-gnu_10.2.1-6cross1 gcc-10-s390x-linux-gnu-base_10.2.1-6cross1 gcc-8-base_8.4.0-7 gcc-9-base_9.3.0-22 gcc-s390x-linux-gnu_4:10.2.1-1 gettext_0.21-4 gettext-base_0.21-4 gpgv_2.2.27-2 grep_3.6-1 groff-base_1.22.4-6 gzip_1.10-4 hostname_3.23 init-system-helpers_1.60 intltool-debian_0.35.0+20060710.5 libacl1_2.2.53-10 libapt-pkg5.0_1.8.4 libapt-pkg6.0_2.2.3 libarchive-zip-perl_1.68-1 libasan5_9.3.0-22 libasan6_10.2.1-6 libasan6-s390x-cross_10.2.1-6cross1 libatomic1_10.2.1-6 libatomic1-s390x-cross_10.2.1-6cross1 libattr1_1:2.4.48-6 libaudit-common_1:3.0-2 libaudit1_1:3.0-2 libbinutils_2.35.2-2 libblkid1_2.36.1-7 libbz2-1.0_1.0.8-4 libc-bin_2.31-12 libc-dev-bin_2.31-12 libc6_2.31-12 libc6-dev_2.31-12 libc6-dev-s390x-cross_2.31-9cross4 libc6-s390x-cross_2.31-9cross4 libcap-ng0_0.7.9-2.2+b1 libcc1-0_10.2.1-6 libcom-err2_1.46.2-1 libconfig-auto-perl_0.44-1.1 libconfig-inifiles-perl_3.000003-1 libcrypt-dev_1:4.4.18-4 libcrypt1_1:4.4.18-4 libctf-nobfd0_2.35.2-2 libctf0_2.35.2-2 libdb5.3_5.3.28+dfsg1-0.8 libdebconfclient0_0.257 libdebhelper-perl_13.3.4 libdebian-dpkgcross-perl_2.6.18+nmu1 libdpkg-perl_1.20.9 libelf1_0.183-3 libext2fs2_1.46.2-1 libfakeroot_1.25.3-1.1 libfdisk1_2.36.1-7 libffi6_3.2.1-9 libffi7_3.3-6 libfile-homedir-perl_1.006-1 libfile-stripnondeterminism-perl_1.12.0-1 libfile-which-perl_1.23-1 libgcc-10-dev_10.2.1-6 libgcc-10-dev-s390x-cross_10.2.1-6cross1 libgcc-9-dev_9.3.0-22 libgcc-s1_10.2.1-6 libgcc-s1-s390x-cross_10.2.1-6cross1 libgcrypt20_1.8.7-5 libgdbm-compat4_1.19-2 libgdbm6_1.19-2 libgmp10_2:6.2.1+dfsg-1 libgnutls30_3.7.1-4 libgomp1_10.2.1-6 libgomp1-s390x-cross_10.2.1-6cross1 libgpg-error0_1.38-2 libgssapi-krb5-2_1.18.3-5 libhogweed4_3.5.1+really3.4.1-1 libhogweed6_3.7.2-3 libicu67_67.1-6 libidn2-0_2.3.0-5 libio-string-perl_1.08-3.1 libisl19_0.20-2 libisl23_0.23-1 libitm1_10.2.1-6 libitm1-s390x-cross_10.2.1-6cross1 libk5crypto3_1.18.3-5 libkeyutils1_1.6.1-2 libkrb5-3_1.18.3-5 libkrb5support0_1.18.3-5 liblocale-gettext-perl_1.07-4+b1 liblsan0_10.2.1-6 liblz4-1_1.9.3-2 liblzma5_5.2.5-2 libmagic-mgc_1:5.39-3 libmagic1_1:5.39-3 libmount1_2.36.1-7 libmpc3_1.2.0-1 libmpfr6_4.1.0-3 libmpx2_8.4.0-7 libncursesw6_6.2+20201114-2 libnettle6_3.5.1+really3.4.1-1 libnettle8_3.7.2-3 libnsl-dev_1.3.0-2 libnsl2_1.3.0-2 libp11-kit0_0.23.22-1 libpam-modules_1.4.0-7 libpam-modules-bin_1.4.0-7 libpam-runtime_1.4.0-7 libpam0g_1.4.0-7 libpcre2-8-0_10.36-2 libpcre3_2:8.39-13 libperl5.28_5.28.1-6 libperl5.32_5.32.1-4 libpipeline1_1.5.3-1 libquadmath0_10.2.1-6 libseccomp2_2.5.1-1 libselinux1_3.1-3 libsemanage-common_3.1-1 libsemanage1_3.1-1+b2 libsepol1_3.1-1 libsigsegv2_2.13-1 libsmartcols1_2.36.1-7 libss2_1.46.2-1 libssl1.1_1.1.1k-1 libstdc++-10-dev_10.2.1-6 libstdc++-10-dev-s390x-cross_10.2.1-6cross1 libstdc++-9-dev_9.3.0-22 libstdc++6_10.2.1-6 libstdc++6-s390x-cross_10.2.1-6cross1 libsub-override-perl_0.09-2 libsystemd0_247.3-5 libtasn1-6_4.16.0-2 libtinfo6_6.2+20201114-2 libtirpc-common_1.3.1-1 libtirpc-dev_1.3.1-1 libtirpc3_1.3.1-1 libtool_2.4.6-15 libtsan0_10.2.1-6 libubsan1_10.2.1-6 libubsan1-s390x-cross_10.2.1-6cross1 libuchardet0_0.0.7-1 libudev1_247.3-5 libunistring2_0.9.10-4 libuuid1_2.36.1-7 libxml-libxml-perl_2.0134+dfsg-2+b1 libxml-namespacesupport-perl_1.12-1.1 libxml-sax-base-perl_1.09-1.1 libxml-sax-perl_1.02+dfsg-1 libxml-simple-perl_2.25-1 libxml2_2.9.10+dfsg-6.6 libxxhash0_0.8.0-2 libyaml-perl_1.30-1 libzstd1_1.4.8+dfsg-2.1 linux-libc-dev_5.10.28-1 linux-libc-dev-s390x-cross_5.10.13-1cross4 login_1:4.8.1-1 logsave_1.46.2-1 lsb-base_11.1.0 m4_1.4.18-5 make_4.3-4.1 man-db_2.9.4-2 mawk_1.3.4.20200120-2 mount_2.36.1-7 ncurses-base_6.2+20201114-2 ncurses-bin_6.2+20201114-2 passwd_1:4.8.1-1 patch_2.7.6-7 perl_5.32.1-4 perl-base_5.32.1-4 perl-modules-5.28_5.28.1-6 perl-modules-5.32_5.32.1-4 po-debconf_1.0.21+nmu1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.7-1 sensible-utils_0.0.14 sysvinit-utils_2.96-7 tar_1.34+dfsg-1 tzdata_2021a-1 ucf_3.0043 util-linux_2.36.1-7 xz-utils_5.2.5-2 zlib1g_1:1.2.11.dfsg-2 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: gf2x Binary: libgf2x3, libgf2x-dev Architecture: any Version: 1.3.0-1 Maintainer: Debian Science Maintainers Uploaders: Julien Puydt Homepage: http://gf2x.gforge.inria.fr/ Standards-Version: 4.4.1 Vcs-Browser: https://salsa.debian.org/science-team/gf2x Vcs-Git: https://salsa.debian.org/science-team/gf2x.git Build-Depends: debhelper-compat (= 12) Package-List: libgf2x-dev deb libdevel optional arch=any libgf2x3 deb libs optional arch=any Checksums-Sha1: 1b9c7e14031afc5488b9aa27f5501f78c90f00b4 727717 gf2x_1.3.0.orig.tar.gz fbc18a958d3fd5d6f1c7083df409a3b03e028d2a 2552 gf2x_1.3.0-1.debian.tar.xz Checksums-Sha256: 9472cd651972a1de38e3c4c47697a86e0ecf19d7d33454d4bc2a62bc85841b59 727717 gf2x_1.3.0.orig.tar.gz 4efdddf733f8316bc88db8fc1d161163ed79c28dfb89c6ca56dad84b1ddcaf87 2552 gf2x_1.3.0-1.debian.tar.xz Files: 842f087ce423c279dced26b85b0fd1d0 727717 gf2x_1.3.0.orig.tar.gz f843b2df8d20d64ce6d06b2e947d436c 2552 gf2x_1.3.0-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJGBAEBCgAwFiEEgS7v2KP7pKzk3xFLBMU71/4DBVEFAl4R3EgSHGpwdXlkdEBk ZWJpYW4ub3JnAAoJEATFO9f+AwVRALsP/2UF/IXQGqDJQ5fBtUbb03ZPLBfcE+cw LwEVzNuugM9S7RLV6gpRGFxAe2A+VSS95Y+lkQYOTCNTCC08t5M6fXFZQR+B3vg4 8AC44DM/y/vHtZnm0wmdXoCXcSoIu73JmUoYhKBJivGCJHQI4i1GbRdGqQ5KdGWh V+vGuB1pe4a3x2YV7e5F+7O5PHtaR9jppwydHHB6/rsvOINRMMVVE3aCeFw7xoKl b7VFO1sRxjwxYL++A30RGUjIHO8NWQ1pKKTluceZefKWISBaCwMV1wnLaBiSCoxl Wu8IyGeApBl98Rnp5gvCBBEPb/OS4MheNlRmDm3xnumKyfouBaqUNTlly9+zlapi NK3TDpvSQ0VgLK+EIQoJYdmCvWxRQErzdji4Bfw+PsRJN9wZtLpY+2y+wsoCAaED 3lJAn4YJcEiTai4/ypJ29vGv3RBE6Z2yidjPT88GQB8WzybteEtOtV8GFzWXb2tK xg0el75w0Sc68loFUJKnphpUfipkYzlxfuCwbWlH2ipBegwtvxNveRctKzBdm+Nx l2vIefD3+GpIhooYOYrj7FBzpu5bXQXmFeVbaO5AG16zIFs7P2O09aegqzfxo5N4 ltqPTYq3vPVjSMUyNcG5mhPdxn2Q4cwiTAlQ/2NxaVRshPWlXqYXEl3GCHBWJj8v 3Z7pxMet0KMx =fHqO -----END PGP SIGNATURE----- gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.tfi1od4k/trustedkeys.kbx': General error gpgv: Signature made Sun Jan 5 12:53:28 2020 UTC gpgv: using RSA key 812EEFD8A3FBA4ACE4DF114B04C53BD7FE030551 gpgv: issuer "jpuydt@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./gf2x_1.3.0-1.dsc dpkg-source: info: extracting gf2x in /<> dpkg-source: info: unpacking gf2x_1.3.0.orig.tar.gz dpkg-source: info: unpacking gf2x_1.3.0-1.debian.tar.xz Check disk space ---------------- Sufficient free space for build User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf CONFIG_SITE=/etc/dpkg-cross/cross-config.s390x DEB_BUILD_OPTIONS=nocheck HOME=/sbuild-nonexistent LANG=en_US.UTF-8 LC_ALL=C.UTF-8 LOGNAME=helmut PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games SCHROOT_ALIAS_NAME=unstable-amd64-sbuild SCHROOT_CHROOT_NAME=unstable-amd64-sbuild SCHROOT_COMMAND=env SCHROOT_GID=1003 SCHROOT_GROUP=helmut SCHROOT_SESSION_ID=unstable-amd64-sbuild-3e095db6-0db1-4cfb-9173-f2c87bf363f7 SCHROOT_UID=1003 SCHROOT_USER=helmut SHELL=/bin/sh USER=helmut dpkg-buildpackage ----------------- Command: dpkg-buildpackage -as390x -Pcross,nocheck -us -uc -B -rfakeroot --jobs-try=1 dpkg-buildpackage: info: source package gf2x dpkg-buildpackage: info: source version 1.3.0-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Julien Puydt dpkg-architecture: warning: specified GNU system type s390x-linux-gnu does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable dpkg-source --before-build . dpkg-buildpackage: info: host architecture s390x fakeroot debian/rules clean dh clean --with autoreconf dh_clean debian/rules build-arch dh build-arch --with autoreconf dh_update_autotools_config -a dh_autoreconf -a libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'config'. libtoolize: copying file 'config/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'config'. libtoolize: copying file 'config/libtool.m4' libtoolize: copying file 'config/ltoptions.m4' libtoolize: copying file 'config/ltsugar.m4' libtoolize: copying file 'config/ltversion.m4' libtoolize: copying file 'config/lt~obsolete.m4' configure.ac:51: installing 'config/compile' configure.ac:63: installing 'config/missing' Makefile.am: installing 'config/depcomp' debian/rules override_dh_auto_configure make[1]: Entering directory '/<>' dh_auto_configure -- --disable-hardware-specific-code --disable-static ./configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/s390x-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --host=s390x-linux-gnu --disable-hardware-specific-code --disable-static configure: loading site script /etc/dpkg-cross/cross-config.s390x checking build system type... x86_64-pc-linux-gnu checking host system type... s390x-ibm-linux-gnu checking target system type... s390x-ibm-linux-gnu checking for s390x-linux-gnu-gcc... s390x-linux-gnu-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether s390x-linux-gnu-gcc accepts -g... yes checking for s390x-linux-gnu-gcc option to accept ISO C89... none needed checking whether s390x-linux-gnu-gcc understands -c and -o together... yes checking how to run the C preprocessor... s390x-linux-gnu-gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for s390x-linux-gnu-strip... s390x-linux-gnu-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking whether make supports nested variables... yes checking dependency style of s390x-linux-gnu-gcc... none checking whether to enable maintainer-specific portions of Makefiles... no checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by s390x-linux-gnu-gcc... /usr/s390x-linux-gnu/bin/ld checking if the linker (/usr/s390x-linux-gnu/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/s390x-linux-gnu-nm -B checking the name lister (/usr/bin/s390x-linux-gnu-nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to s390x-ibm-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/s390x-linux-gnu/bin/ld option to reload object files... -r checking for s390x-linux-gnu-objdump... s390x-linux-gnu-objdump checking how to recognize dependent libraries... pass_all checking for s390x-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for s390x-linux-gnu-ar... s390x-linux-gnu-ar checking for archiver @FILE support... @ checking for s390x-linux-gnu-strip... (cached) s390x-linux-gnu-strip checking for s390x-linux-gnu-ranlib... s390x-linux-gnu-ranlib checking command to parse /usr/bin/s390x-linux-gnu-nm -B output from s390x-linux-gnu-gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for s390x-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if s390x-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no checking for s390x-linux-gnu-gcc option to produce PIC... -fPIC -DPIC checking if s390x-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes checking if s390x-linux-gnu-gcc static flag -static works... yes checking if s390x-linux-gnu-gcc supports -c -o file.o... yes checking if s390x-linux-gnu-gcc supports -c -o file.o... (cached) yes checking whether the s390x-linux-gnu-gcc linker (/usr/s390x-linux-gnu/bin/ld -m elf64_s390) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for s390x-linux-gnu-gcc... (cached) s390x-linux-gnu-gcc checking whether we are using the GNU C compiler... (cached) yes checking whether s390x-linux-gnu-gcc accepts -g... (cached) yes checking for s390x-linux-gnu-gcc option to accept ISO C89... (cached) none needed checking whether s390x-linux-gnu-gcc understands -c and -o together... (cached) yes checking for s390x-linux-gnu-g++... s390x-linux-gnu-g++ checking whether we are using the GNU C++ compiler... yes checking whether s390x-linux-gnu-g++ accepts -g... yes checking dependency style of s390x-linux-gnu-g++... none checking how to run the C++ preprocessor... s390x-linux-gnu-g++ -E checking for ld used by s390x-linux-gnu-g++... /usr/s390x-linux-gnu/bin/ld -m elf64_s390 checking if the linker (/usr/s390x-linux-gnu/bin/ld -m elf64_s390) is GNU ld... yes checking whether the s390x-linux-gnu-g++ linker (/usr/s390x-linux-gnu/bin/ld -m elf64_s390) supports shared libraries... yes checking for s390x-linux-gnu-g++ option to produce PIC... -fPIC -DPIC checking if s390x-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes checking if s390x-linux-gnu-g++ static flag -static works... yes checking if s390x-linux-gnu-g++ supports -c -o file.o... yes checking if s390x-linux-gnu-g++ supports -c -o file.o... (cached) yes checking whether the s390x-linux-gnu-g++ linker (/usr/s390x-linux-gnu/bin/ld -m elf64_s390) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking warning verbosity option... -Wall -W for C++ -Wall -W for C checking for s390x-linux-gnu-gcc option to accept ISO C99... none needed checking how to run the C preprocessor... s390x-linux-gnu-gcc -E checking build system compiler s390x-linux-gnu-gcc... no checking build system compiler s390x-linux-gnu-gcc -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -Wdate-time -D_FORTIFY_SOURCE=2... no checking build system compiler cc... yes checking for build system executable suffix... checking for __attribute__((visibility("hidden")))... yes checking that clock() returns non-constant values... configure: check skipped because of cross-compiling dontknow checking size of unsigned long... 8 Not using hardware-specific code due to --disable-hardware-specific-code flag configure: using ABI="default" configure: CC="s390x-linux-gnu-gcc" configure: CFLAGS="-g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W" configure: CPPFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2" configure: hwdir="generic64" checking the number of bits in an unsigned long... configure: check skipped because of cross-compiling dontknow checking whether already_tuned/generic64/ is right assuming 64-bits unsigned longs... configure: cannot tell (cross-compiling) 0 0 File ./toom-gpl.c is present, using a GPL-licensed gf2x checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating version.sh config.status: creating Makefile config.status: creating tests/Makefile config.status: creating lowlevel/Makefile config.status: creating src/Makefile config.status: creating fft/Makefile config.status: creating apps/Makefile config.status: creating fft/gf2x-fft.h config.status: creating gf2x.h.in config.status: creating gf2x.pc config.status: creating gf2x/gf2x-config.h config.status: creating gf2x/gf2x-config-export.h config.status: creating gf2x.h config.status: gf2x.h is unchanged config.status: linking already_tuned/generic64/gf2x-thresholds.h to gf2x/gf2x-thresholds.h config.status: linking already_tuned/generic64/gf2x_mul1.h to gf2x/gf2x_mul1.h config.status: linking already_tuned/generic/gf2x_mul2.h to gf2x/gf2x_mul2.h config.status: linking already_tuned/generic/gf2x_mul3.h to gf2x/gf2x_mul3.h config.status: linking already_tuned/generic/gf2x_mul4.h to gf2x/gf2x_mul4.h config.status: linking already_tuned/generic/gf2x_mul5.h to gf2x/gf2x_mul5.h config.status: linking already_tuned/generic/gf2x_mul6.h to gf2x/gf2x_mul6.h config.status: linking already_tuned/generic/gf2x_mul7.h to gf2x/gf2x_mul7.h config.status: linking already_tuned/generic/gf2x_mul8.h to gf2x/gf2x_mul8.h config.status: linking already_tuned/generic/gf2x_mul9.h to gf2x/gf2x_mul9.h config.status: executing depfiles commands config.status: executing libtool commands make[1]: Leaving directory '/<>' dh_auto_build -a make -j1 make[1]: Entering directory '/<>' make all-recursive make[2]: Entering directory '/<>' Making all in lowlevel make[3]: Entering directory '/<>/lowlevel' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/<>/lowlevel' Making all in src make[3]: Entering directory '/<>/src' sed -e s/@@SIZE@@/1/g < ./tuneup_pre.c > tuneup_1.c sed -e s/@@SIZE@@/1/g < ./tuning_undefs_pre.h > tuning_undefs_1.h sed -e s/@@SIZE@@/2/g < ./tuneup_pre.c > tuneup_2.c sed -e s/@@SIZE@@/2/g < ./tuning_undefs_pre.h > tuning_undefs_2.h sed -e s/@@SIZE@@/3/g < ./tuneup_pre.c > tuneup_3.c sed -e s/@@SIZE@@/3/g < ./tuning_undefs_pre.h > tuning_undefs_3.h sed -e s/@@SIZE@@/4/g < ./tuneup_pre.c > tuneup_4.c sed -e s/@@SIZE@@/4/g < ./tuning_undefs_pre.h > tuning_undefs_4.h sed -e s/@@SIZE@@/5/g < ./tuneup_pre.c > tuneup_5.c sed -e s/@@SIZE@@/5/g < ./tuning_undefs_pre.h > tuning_undefs_5.h sed -e s/@@SIZE@@/6/g < ./tuneup_pre.c > tuneup_6.c sed -e s/@@SIZE@@/6/g < ./tuning_undefs_pre.h > tuning_undefs_6.h sed -e s/@@SIZE@@/7/g < ./tuneup_pre.c > tuneup_7.c sed -e s/@@SIZE@@/7/g < ./tuning_undefs_pre.h > tuning_undefs_7.h sed -e s/@@SIZE@@/8/g < ./tuneup_pre.c > tuneup_8.c sed -e s/@@SIZE@@/8/g < ./tuning_undefs_pre.h > tuning_undefs_8.h sed -e s/@@SIZE@@/9/g < ./tuneup_pre.c > tuneup_9.c sed -e s/@@SIZE@@/9/g < ./tuning_undefs_pre.h > tuning_undefs_9.h cc `test -f '../lowlevel/gen_bb_mul_code.c' || echo './'`../lowlevel/gen_bb_mul_code.c -o gen_bb_mul_code ./gen_bb_mul_code 64 2 > gen_mul1_w64k2.c ./gen_bb_mul_code 64 3 > gen_mul1_w64k3.c ./gen_bb_mul_code 64 4 > gen_mul1_w64k4.c ./gen_bb_mul_code 64 5 > gen_mul1_w64k5.c ./gen_bb_mul_code 64 6 > gen_mul1_w64k6.c make all-am make[4]: Entering directory '/<>/src' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/<>/src' make[3]: Leaving directory '/<>/src' Making all in . make[3]: Entering directory '/<>' s390x-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I./gf2x -I. -I. -I./fft -I./fft -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -c -o libgf2x_local_a-gf2x.o `test -f 'gf2x.c' || echo './'`gf2x.c s390x-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I./gf2x -I. -I. -I./fft -I./fft -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -c -o libgf2x_local_a-toom.o `test -f 'toom.c' || echo './'`toom.c s390x-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I./gf2x -I. -I. -I./fft -I./fft -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -c -o libgf2x_local_a-toom128.o `test -f 'toom128.c' || echo './'`toom128.c s390x-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I./gf2x -I. -I. -I./fft -I./fft -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -c -o libgf2x_local_a-toom-gpl.o `test -f 'toom-gpl.c' || echo './'`toom-gpl.c s390x-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I./gf2x -I. -I. -I./fft -I./fft -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -c -o fft/libgf2x_local_a-gf2x-ternary-fft.o `test -f 'fft/gf2x-ternary-fft.c' || echo './'`fft/gf2x-ternary-fft.c rm -f libgf2x-local.a s390x-linux-gnu-ar cru libgf2x-local.a libgf2x_local_a-gf2x.o libgf2x_local_a-toom.o libgf2x_local_a-toom128.o libgf2x_local_a-toom-gpl.o fft/libgf2x_local_a-gf2x-ternary-fft.o s390x-linux-gnu-ar: `u' modifier ignored since `D' is the default (see `U') s390x-linux-gnu-ranlib libgf2x-local.a /bin/bash ./libtool --tag=CC --mode=compile s390x-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I./gf2x -I. -I. -I./fft -I./fft -Wdate-time -D_FORTIFY_SOURCE=2 -fvisibility=hidden -DGF2X_EXPORTED="__attribute__((visibility(\"default\")))" -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -c -o libgf2x_la-gf2x.lo `test -f 'gf2x.c' || echo './'`gf2x.c libtool: compile: s390x-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I./gf2x -I. -I. -I./fft -I./fft -Wdate-time -D_FORTIFY_SOURCE=2 -fvisibility=hidden "-DGF2X_EXPORTED=__attribute__((visibility(\"default\")))" -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -c gf2x.c -fPIC -DPIC -o .libs/libgf2x_la-gf2x.o /bin/bash ./libtool --tag=CC --mode=compile s390x-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I./gf2x -I. -I. -I./fft -I./fft -Wdate-time -D_FORTIFY_SOURCE=2 -fvisibility=hidden -DGF2X_EXPORTED="__attribute__((visibility(\"default\")))" -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -c -o libgf2x_la-toom.lo `test -f 'toom.c' || echo './'`toom.c libtool: compile: s390x-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I./gf2x -I. -I. -I./fft -I./fft -Wdate-time -D_FORTIFY_SOURCE=2 -fvisibility=hidden "-DGF2X_EXPORTED=__attribute__((visibility(\"default\")))" -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -c toom.c -fPIC -DPIC -o .libs/libgf2x_la-toom.o /bin/bash ./libtool --tag=CC --mode=compile s390x-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I./gf2x -I. -I. -I./fft -I./fft -Wdate-time -D_FORTIFY_SOURCE=2 -fvisibility=hidden -DGF2X_EXPORTED="__attribute__((visibility(\"default\")))" -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -c -o libgf2x_la-toom128.lo `test -f 'toom128.c' || echo './'`toom128.c libtool: compile: s390x-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I./gf2x -I. -I. -I./fft -I./fft -Wdate-time -D_FORTIFY_SOURCE=2 -fvisibility=hidden "-DGF2X_EXPORTED=__attribute__((visibility(\"default\")))" -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -c toom128.c -fPIC -DPIC -o .libs/libgf2x_la-toom128.o /bin/bash ./libtool --tag=CC --mode=compile s390x-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I./gf2x -I. -I. -I./fft -I./fft -Wdate-time -D_FORTIFY_SOURCE=2 -fvisibility=hidden -DGF2X_EXPORTED="__attribute__((visibility(\"default\")))" -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -c -o libgf2x_la-toom-gpl.lo `test -f 'toom-gpl.c' || echo './'`toom-gpl.c libtool: compile: s390x-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I./gf2x -I. -I. -I./fft -I./fft -Wdate-time -D_FORTIFY_SOURCE=2 -fvisibility=hidden "-DGF2X_EXPORTED=__attribute__((visibility(\"default\")))" -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -c toom-gpl.c -fPIC -DPIC -o .libs/libgf2x_la-toom-gpl.o /bin/bash ./libtool --tag=CC --mode=compile s390x-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I./gf2x -I. -I. -I./fft -I./fft -Wdate-time -D_FORTIFY_SOURCE=2 -fvisibility=hidden -DGF2X_EXPORTED="__attribute__((visibility(\"default\")))" -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -c -o fft/libgf2x_la-gf2x-ternary-fft.lo `test -f 'fft/gf2x-ternary-fft.c' || echo './'`fft/gf2x-ternary-fft.c libtool: compile: s390x-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I./gf2x -I. -I. -I./fft -I./fft -Wdate-time -D_FORTIFY_SOURCE=2 -fvisibility=hidden "-DGF2X_EXPORTED=__attribute__((visibility(\"default\")))" -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -c fft/gf2x-ternary-fft.c -fPIC -DPIC -o fft/.libs/libgf2x_la-gf2x-ternary-fft.o /bin/bash ./libtool --tag=CC --mode=link s390x-linux-gnu-gcc -fvisibility=hidden -DGF2X_EXPORTED="__attribute__((visibility(\"default\")))" -g -O2 -ffile-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -version-info 3:0:0 -no-undefined -Wl,-z,relro -Wl,-z,now -o libgf2x.la -rpath /usr/lib/s390x-linux-gnu libgf2x_la-gf2x.lo libgf2x_la-toom.lo libgf2x_la-toom128.lo libgf2x_la-toom-gpl.lo fft/libgf2x_la-gf2x-ternary-fft.lo libtool: link: s390x-linux-gnu-gcc -shared -fPIC -DPIC .libs/libgf2x_la-gf2x.o .libs/libgf2x_la-toom.o .libs/libgf2x_la-toom128.o .libs/libgf2x_la-toom-gpl.o fft/.libs/libgf2x_la-gf2x-ternary-fft.o -g -O2 -fstack-protector-strong -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-soname -Wl,libgf2x.so.3 -o .libs/libgf2x.so.3.0.0 libtool: link: (cd ".libs" && rm -f "libgf2x.so.3" && ln -s "libgf2x.so.3.0.0" "libgf2x.so.3") libtool: link: (cd ".libs" && rm -f "libgf2x.so" && ln -s "libgf2x.so.3.0.0" "libgf2x.so") libtool: link: ( cd ".libs" && rm -f "libgf2x.la" && ln -s "../libgf2x.la" "libgf2x.la" ) make[3]: Leaving directory '/<>' Making all in fft make[3]: Entering directory '/<>/fft' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/<>/fft' Making all in tests make[3]: Entering directory '/<>/tests' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/<>/tests' make[2]: Leaving directory '/<>' make[1]: Leaving directory '/<>' dh_auto_test -a create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary-arch dh binary-arch --with autoreconf dh_testroot -a dh_prep -a dh_auto_install -a make -j1 install DESTDIR=/<>/debian/tmp AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/<>' Making install in lowlevel make[2]: Entering directory '/<>/lowlevel' make[3]: Entering directory '/<>/lowlevel' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/<>/lowlevel' make[2]: Leaving directory '/<>/lowlevel' Making install in src make[2]: Entering directory '/<>/src' make install-am make[3]: Entering directory '/<>/src' make[4]: Entering directory '/<>/src' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/<>/src' make[3]: Leaving directory '/<>/src' make[2]: Leaving directory '/<>/src' Making install in . make[2]: Entering directory '/<>' make[3]: Entering directory '/<>' /bin/mkdir -p '/<>/debian/tmp/usr/lib/s390x-linux-gnu' /bin/bash ./libtool --mode=install /usr/bin/install -c libgf2x.la '/<>/debian/tmp/usr/lib/s390x-linux-gnu' libtool: install: /usr/bin/install -c .libs/libgf2x.so.3.0.0 /<>/debian/tmp/usr/lib/s390x-linux-gnu/libgf2x.so.3.0.0 libtool: install: (cd /<>/debian/tmp/usr/lib/s390x-linux-gnu && { ln -s -f libgf2x.so.3.0.0 libgf2x.so.3 || { rm -f libgf2x.so.3 && ln -s libgf2x.so.3.0.0 libgf2x.so.3; }; }) libtool: install: (cd /<>/debian/tmp/usr/lib/s390x-linux-gnu && { ln -s -f libgf2x.so.3.0.0 libgf2x.so || { rm -f libgf2x.so && ln -s libgf2x.so.3.0.0 libgf2x.so; }; }) libtool: install: /usr/bin/install -c .libs/libgf2x.lai /<>/debian/tmp/usr/lib/s390x-linux-gnu/libgf2x.la libtool: warning: remember to run 'libtool --finish /usr/lib/s390x-linux-gnu' /bin/mkdir -p '/<>/debian/tmp/usr/include' /bin/mkdir -p '/<>/debian/tmp/usr/include/gf2x' /usr/bin/install -c -m 644 gf2x/gf2x-impl-export.h gf2x/gf2x-small.h '/<>/debian/tmp/usr/include/gf2x' /usr/bin/install -c -m 644 gf2x.h '/<>/debian/tmp/usr/include/.' /bin/mkdir -p '/<>/debian/tmp/usr/include' /bin/mkdir -p '/<>/debian/tmp/usr/include/gf2x' /usr/bin/install -c -m 644 gf2x/gf2x-config.h gf2x/gf2x-config-export.h gf2x/gf2x-thresholds.h gf2x/gf2x_mul1.h gf2x/gf2x_mul2.h gf2x/gf2x_mul3.h gf2x/gf2x_mul4.h gf2x/gf2x_mul5.h gf2x/gf2x_mul6.h gf2x/gf2x_mul7.h gf2x/gf2x_mul8.h gf2x/gf2x_mul9.h '/<>/debian/tmp/usr/include/gf2x' /bin/mkdir -p '/<>/debian/tmp/usr/lib/s390x-linux-gnu/pkgconfig' /usr/bin/install -c -m 644 gf2x.pc '/<>/debian/tmp/usr/lib/s390x-linux-gnu/pkgconfig' make[3]: Leaving directory '/<>' make[2]: Leaving directory '/<>' Making install in fft make[2]: Entering directory '/<>/fft' make[3]: Entering directory '/<>/fft' make[3]: Leaving directory '/<>/fft' make[2]: Leaving directory '/<>/fft' Making install in tests make[2]: Entering directory '/<>/tests' make[3]: Entering directory '/<>/tests' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/<>/tests' make[2]: Leaving directory '/<>/tests' make[1]: Leaving directory '/<>' dh_install -a dh_installdocs -a dh_installchangelogs -a dh_perl -a dh_link -a dh_strip_nondeterminism -a dh_compress -a dh_fixperms -a dh_missing -a dh_missing: warning: usr/lib/s390x-linux-gnu/libgf2x.la exists in debian/tmp but is not installed to anywhere The following debhelper tools have reported what they installed (with files per package) * dh_install: libgf2x-dev (4), libgf2x3 (2) * dh_installdocs: libgf2x-dev (0), libgf2x3 (1) If the missing files are installed by another tool, please file a bug against it. When filing the report, if the tool is not part of debhelper itself, please reference the "Logging helpers and dh_missing" section from the "PROGRAMMING" guide for debhelper (10.6.3+). (in the debhelper package: /usr/share/doc/debhelper/PROGRAMMING.gz) Be sure to test with dpkg-buildpackage -A/-B as the results may vary when only a subset is built If the omission is intentional or no other helper can take care of this consider adding the paths to debian/not-installed. Remember to be careful with paths containing "s390x-linux-gnu", where you might need to use a wildcard or (assuming compat 13+) e.g. ${DEB_HOST_MULTIARCH} in debian/not-installed to ensure it works on all architectures (see #961104). dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb -a dh_gencontrol -a dh_md5sums -a dh_builddeb -a dpkg-deb: building package 'libgf2x3' in '../libgf2x3_1.3.0-1_s390x.deb'. dpkg-deb: building package 'libgf2x3-dbgsym' in '../libgf2x3-dbgsym_1.3.0-1_s390x.deb'. dpkg-deb: building package 'libgf2x-dev' in '../libgf2x-dev_1.3.0-1_s390x.deb'. dpkg-genbuildinfo --build=any dpkg-genchanges --build=any >../gf2x_1.3.0-1_s390x.changes dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) -------------------------------------------------------------------------------- Build finished at 2021-05-16T20:55:03Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ gf2x_1.3.0-1_s390x.changes: --------------------------- Format: 1.8 Date: Sun, 05 Jan 2020 10:12:22 +0100 Source: gf2x Binary: libgf2x-dev libgf2x3 libgf2x3-dbgsym Built-For-Profiles: cross nocheck Architecture: s390x Version: 1.3.0-1 Distribution: unstable Urgency: medium Maintainer: Debian Science Maintainers Changed-By: Julien Puydt Description: libgf2x-dev - Routines for fast arithmetic in GF(2)[x] (development files) libgf2x3 - Routines for fast arithmetic in GF(2)[x] Changes: gf2x (1.3.0-1) unstable; urgency=medium . * New upstream release. * Move from debian/compat file to debhelper-compat (= 12). * Bump std-ver to 4.4.1. * Drop patch (upstream). * Use my debian.org mail address. * Bump soname version. * Install the pkgconfig file. * Don't build the static library. Checksums-Sha1: 20b083c398cba4def66048a147d24f44f74bd7a8 5040 gf2x_1.3.0-1_s390x.buildinfo 3f835d056e1d4e0cb0c73e30f37c2f721965e773 32068 libgf2x-dev_1.3.0-1_s390x.deb 297df69cbae03e55cddd53cd8c80366772d5cca7 86064 libgf2x3-dbgsym_1.3.0-1_s390x.deb 9037675a5b3f1711369e20aa2045ce66db589e14 51192 libgf2x3_1.3.0-1_s390x.deb Checksums-Sha256: 0c2e280553fb384b2e3a2e705aeeba17697dab980dfcfa6b3a2ea4196e84c8d5 5040 gf2x_1.3.0-1_s390x.buildinfo 31d1a42899d101142189227950ae2cc75f4e5ecb9593feb9912dd6e305651b11 32068 libgf2x-dev_1.3.0-1_s390x.deb a3fbd227845178e582d50e53f83b38864bc42f3a857269d55e4dba30e71fe27a 86064 libgf2x3-dbgsym_1.3.0-1_s390x.deb 6b2da92c9d775de429c064cbb5132f1802ab6aadf176a6eb6eae5ec02c51c943 51192 libgf2x3_1.3.0-1_s390x.deb Files: 167085bed160a9873e49a09938a6459b 5040 math optional gf2x_1.3.0-1_s390x.buildinfo 900cd32cdb9a5d32e4d78325eee06288 32068 libdevel optional libgf2x-dev_1.3.0-1_s390x.deb b9db66a3810dfcdc823bd1befbd77858 86064 debug optional libgf2x3-dbgsym_1.3.0-1_s390x.deb fe7f1c9b4ee8443df75b05653fb336b2 51192 libs optional libgf2x3_1.3.0-1_s390x.deb +------------------------------------------------------------------------------+ | Buildinfo | +------------------------------------------------------------------------------+ Format: 1.0 Source: gf2x Binary: libgf2x-dev libgf2x3 libgf2x3-dbgsym Architecture: s390x Version: 1.3.0-1 Checksums-Md5: 900cd32cdb9a5d32e4d78325eee06288 32068 libgf2x-dev_1.3.0-1_s390x.deb b9db66a3810dfcdc823bd1befbd77858 86064 libgf2x3-dbgsym_1.3.0-1_s390x.deb fe7f1c9b4ee8443df75b05653fb336b2 51192 libgf2x3_1.3.0-1_s390x.deb Checksums-Sha1: 3f835d056e1d4e0cb0c73e30f37c2f721965e773 32068 libgf2x-dev_1.3.0-1_s390x.deb 297df69cbae03e55cddd53cd8c80366772d5cca7 86064 libgf2x3-dbgsym_1.3.0-1_s390x.deb 9037675a5b3f1711369e20aa2045ce66db589e14 51192 libgf2x3_1.3.0-1_s390x.deb Checksums-Sha256: 31d1a42899d101142189227950ae2cc75f4e5ecb9593feb9912dd6e305651b11 32068 libgf2x-dev_1.3.0-1_s390x.deb a3fbd227845178e582d50e53f83b38864bc42f3a857269d55e4dba30e71fe27a 86064 libgf2x3-dbgsym_1.3.0-1_s390x.deb 6b2da92c9d775de429c064cbb5132f1802ab6aadf176a6eb6eae5ec02c51c943 51192 libgf2x3_1.3.0-1_s390x.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Sun, 16 May 2021 20:55:02 +0000 Build-Path: /<> Installed-Build-Depends: autoconf (= 2.69-14), automake (= 1:1.16.3-2), autopoint (= 0.21-4), autotools-dev (= 20180224.1+nmu1), base-files (= 11.1), base-passwd (= 3.5.50), bash (= 5.1-3), binutils (= 2.35.2-2), binutils-common (= 2.35.2-2), binutils-x86-64-linux-gnu (= 2.35.2-2), bsdextrautils (= 2.36.1-7), bsdutils (= 1:2.36.1-7), build-essential (= 12.9), bzip2 (= 1.0.8-4), coreutils (= 8.32-4+b1), cpp (= 4:10.2.1-1), cpp-10 (= 10.2.1-6), dash (= 0.5.11+git20210120+802ebd4-1), debconf (= 1.5.76), debhelper (= 13.3.4), debianutils (= 4.11.2), dh-autoreconf (= 20), dh-strip-nondeterminism (= 1.12.0-1), diffutils (= 1:3.7-5), dpkg (= 1.20.9), dpkg-dev (= 1.20.9), dwz (= 0.14-1), file (= 1:5.39-3), findutils (= 4.8.0-1), g++ (= 4:10.2.1-1), g++-10 (= 10.2.1-6), gcc (= 4:10.2.1-1), gcc-10 (= 10.2.1-6), gcc-10-base (= 10.2.1-6), gettext (= 0.21-4), gettext-base (= 0.21-4), grep (= 3.6-1), groff-base (= 1.22.4-6), gzip (= 1.10-4), hostname (= 3.23), init-system-helpers (= 1.60), intltool-debian (= 0.35.0+20060710.5), libacl1 (= 2.2.53-10), libarchive-zip-perl (= 1.68-1), libasan6 (= 10.2.1-6), libatomic1 (= 10.2.1-6), libattr1 (= 1:2.4.48-6), libaudit-common (= 1:3.0-2), libaudit1 (= 1:3.0-2), libbinutils (= 2.35.2-2), libblkid1 (= 2.36.1-7), libbz2-1.0 (= 1.0.8-4), libc-bin (= 2.31-12), libc-dev-bin (= 2.31-12), libc6 (= 2.31-12), libc6-dev (= 2.31-12), libcap-ng0 (= 0.7.9-2.2+b1), libcc1-0 (= 10.2.1-6), libcom-err2 (= 1.46.2-1), libcrypt-dev (= 1:4.4.18-4), libcrypt1 (= 1:4.4.18-4), libctf-nobfd0 (= 2.35.2-2), libctf0 (= 2.35.2-2), libdb5.3 (= 5.3.28+dfsg1-0.8), libdebconfclient0 (= 0.257), libdebhelper-perl (= 13.3.4), libdpkg-perl (= 1.20.9), libelf1 (= 0.183-3), libfile-stripnondeterminism-perl (= 1.12.0-1), libgcc-10-dev (= 10.2.1-6), libgcc-s1 (= 10.2.1-6), libgcrypt20 (= 1.8.7-5), libgdbm-compat4 (= 1.19-2), libgdbm6 (= 1.19-2), libgmp10 (= 2:6.2.1+dfsg-1), libgomp1 (= 10.2.1-6), libgpg-error0 (= 1.38-2), libgssapi-krb5-2 (= 1.18.3-5), libicu67 (= 67.1-6), libisl23 (= 0.23-1), libitm1 (= 10.2.1-6), libk5crypto3 (= 1.18.3-5), libkeyutils1 (= 1.6.1-2), libkrb5-3 (= 1.18.3-5), libkrb5support0 (= 1.18.3-5), liblsan0 (= 10.2.1-6), liblz4-1 (= 1.9.3-2), liblzma5 (= 5.2.5-2), libmagic-mgc (= 1:5.39-3), libmagic1 (= 1:5.39-3), libmount1 (= 2.36.1-7), libmpc3 (= 1.2.0-1), libmpfr6 (= 4.1.0-3), libnsl-dev (= 1.3.0-2), libnsl2 (= 1.3.0-2), libpam-modules (= 1.4.0-7), libpam-modules-bin (= 1.4.0-7), libpam-runtime (= 1.4.0-7), libpam0g (= 1.4.0-7), libpcre2-8-0 (= 10.36-2), libpcre3 (= 2:8.39-13), libperl5.32 (= 5.32.1-4), libpipeline1 (= 1.5.3-1), libquadmath0 (= 10.2.1-6), libseccomp2 (= 2.5.1-1), libselinux1 (= 3.1-3), libsigsegv2 (= 2.13-1), libsmartcols1 (= 2.36.1-7), libssl1.1 (= 1.1.1k-1), libstdc++-10-dev (= 10.2.1-6), libstdc++6 (= 10.2.1-6), libsub-override-perl (= 0.09-2), libsystemd0 (= 247.3-5), libtinfo6 (= 6.2+20201114-2), libtirpc-common (= 1.3.1-1), libtirpc-dev (= 1.3.1-1), libtirpc3 (= 1.3.1-1), libtool (= 2.4.6-15), libtsan0 (= 10.2.1-6), libubsan1 (= 10.2.1-6), libuchardet0 (= 0.0.7-1), libudev1 (= 247.3-5), libunistring2 (= 0.9.10-4), libuuid1 (= 2.36.1-7), libxml2 (= 2.9.10+dfsg-6.6), libzstd1 (= 1.4.8+dfsg-2.1), linux-libc-dev (= 5.10.28-1), login (= 1:4.8.1-1), lsb-base (= 11.1.0), m4 (= 1.4.18-5), make (= 4.3-4.1), man-db (= 2.9.4-2), mawk (= 1.3.4.20200120-2), ncurses-base (= 6.2+20201114-2), ncurses-bin (= 6.2+20201114-2), patch (= 2.7.6-7), perl (= 5.32.1-4), perl-base (= 5.32.1-4), perl-modules-5.32 (= 5.32.1-4), po-debconf (= 1.0.21+nmu1), sed (= 4.7-1), sensible-utils (= 0.0.14), sysvinit-utils (= 2.96-7), tar (= 1.34+dfsg-1), util-linux (= 2.36.1-7), xz-utils (= 5.2.5-2), zlib1g (= 1:1.2.11.dfsg-2) Environment: DEB_BUILD_OPTIONS="nocheck parallel=1" DEB_BUILD_PROFILES="cross nocheck" LANG="en_US.UTF-8" LC_ALL="C.UTF-8" SOURCE_DATE_EPOCH="1578215542" +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ libgf2x-dev_1.3.0-1_s390x.deb ----------------------------- new Debian package, version 2.0. size 32068 bytes: control archive=1168 bytes. 600 bytes, 16 lines control 1259 bytes, 19 lines md5sums Package: libgf2x-dev Source: gf2x Version: 1.3.0-1 Architecture: s390x Maintainer: Debian Science Maintainers Installed-Size: 90 Depends: libgf2x3 (= 1.3.0-1) Section: libdevel Priority: optional Homepage: http://gf2x.gforge.inria.fr/ Description: Routines for fast arithmetic in GF(2)[x] (development files) GF2X is a C/C++ software package containing routines for fast arithmetic in GF(2)[x] (multiplication, squaring, GCD) and searching for irreducible/primitive trinomials. . This package contains the development files for the library. drwxr-xr-x root/root 0 2020-01-05 09:12 ./ drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/ drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/include/ -rw-r--r-- root/root 4087 2020-01-05 09:12 ./usr/include/gf2x.h drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/include/gf2x/ -rw-r--r-- root/root 950 2020-01-05 09:12 ./usr/include/gf2x/gf2x-config-export.h -rw-r--r-- root/root 3909 2020-01-05 09:12 ./usr/include/gf2x/gf2x-config.h -rw-r--r-- root/root 3765 2020-01-05 09:12 ./usr/include/gf2x/gf2x-impl-export.h -rw-r--r-- root/root 4384 2020-01-05 09:12 ./usr/include/gf2x/gf2x-small.h -rw-r--r-- root/root 4001 2020-01-05 09:12 ./usr/include/gf2x/gf2x-thresholds.h -rw-r--r-- root/root 7187 2020-01-05 09:12 ./usr/include/gf2x/gf2x_mul1.h -rw-r--r-- root/root 1876 2020-01-05 09:12 ./usr/include/gf2x/gf2x_mul2.h -rw-r--r-- root/root 2043 2020-01-05 09:12 ./usr/include/gf2x/gf2x_mul3.h -rw-r--r-- root/root 2191 2020-01-05 09:12 ./usr/include/gf2x/gf2x_mul4.h -rw-r--r-- root/root 2217 2020-01-05 09:12 ./usr/include/gf2x/gf2x_mul5.h -rw-r--r-- root/root 2243 2020-01-05 09:12 ./usr/include/gf2x/gf2x_mul6.h -rw-r--r-- root/root 2411 2020-01-05 09:12 ./usr/include/gf2x/gf2x_mul7.h -rw-r--r-- root/root 2541 2020-01-05 09:12 ./usr/include/gf2x/gf2x_mul8.h -rw-r--r-- root/root 2645 2020-01-05 09:12 ./usr/include/gf2x/gf2x_mul9.h drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/lib/ drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/lib/s390x-linux-gnu/ lrwxrwxrwx root/root 0 2020-01-05 09:12 ./usr/lib/s390x-linux-gnu/libgf2x.so -> libgf2x.so.3.0.0 drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/lib/s390x-linux-gnu/pkgconfig/ -rw-r--r-- root/root 244 2020-01-05 09:12 ./usr/lib/s390x-linux-gnu/pkgconfig/gf2x.pc drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/share/ drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/share/doc/ drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/share/doc/libgf2x-dev/ -rw-r--r-- root/root 825 2020-01-05 09:12 ./usr/share/doc/libgf2x-dev/changelog.Debian.gz -rw-r--r-- root/root 21911 2019-12-10 13:35 ./usr/share/doc/libgf2x-dev/changelog.gz -rw-r--r-- root/root 1599 2020-01-05 09:12 ./usr/share/doc/libgf2x-dev/copyright libgf2x3-dbgsym_1.3.0-1_s390x.deb --------------------------------- new Debian package, version 2.0. size 86064 bytes: control archive=548 bytes. 394 bytes, 13 lines control 106 bytes, 1 lines md5sums Package: libgf2x3-dbgsym Source: gf2x Version: 1.3.0-1 Auto-Built-Package: debug-symbols Architecture: s390x Maintainer: Debian Science Maintainers Installed-Size: 100 Depends: libgf2x3 (= 1.3.0-1) Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libgf2x3 Build-Ids: 93627bae8a322902766751dd1cb661c74ebdd5e5 drwxr-xr-x root/root 0 2020-01-05 09:12 ./ drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/ drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/lib/ drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/lib/debug/ drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/lib/debug/.build-id/ drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/lib/debug/.build-id/93/ -rw-r--r-- root/root 91160 2020-01-05 09:12 ./usr/lib/debug/.build-id/93/627bae8a322902766751dd1cb661c74ebdd5e5.debug drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/share/ drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/share/doc/ lrwxrwxrwx root/root 0 2020-01-05 09:12 ./usr/share/doc/libgf2x3-dbgsym -> libgf2x3 libgf2x3_1.3.0-1_s390x.deb -------------------------- new Debian package, version 2.0. size 51192 bytes: control archive=880 bytes. 519 bytes, 15 lines control 356 bytes, 5 lines md5sums 19 bytes, 1 lines shlibs 67 bytes, 2 lines triggers Package: libgf2x3 Source: gf2x Version: 1.3.0-1 Architecture: s390x Maintainer: Debian Science Maintainers Installed-Size: 98 Depends: libc6 (>= 2.8) Section: libs Priority: optional Multi-Arch: same Homepage: http://gf2x.gforge.inria.fr/ Description: Routines for fast arithmetic in GF(2)[x] GF2X is a C/C++ software package containing routines for fast arithmetic in GF(2)[x] (multiplication, squaring, GCD) and searching for irreducible/primitive trinomials. drwxr-xr-x root/root 0 2020-01-05 09:12 ./ drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/ drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/lib/ drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/lib/s390x-linux-gnu/ lrwxrwxrwx root/root 0 2020-01-05 09:12 ./usr/lib/s390x-linux-gnu/libgf2x.so.3 -> libgf2x.so.3.0.0 -rw-r--r-- root/root 59296 2020-01-05 09:12 ./usr/lib/s390x-linux-gnu/libgf2x.so.3.0.0 drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/share/ drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/share/doc/ drwxr-xr-x root/root 0 2020-01-05 09:12 ./usr/share/doc/libgf2x3/ -rw-r--r-- root/root 3704 2019-03-28 18:05 ./usr/share/doc/libgf2x3/README.gz -rw-r--r-- root/root 825 2020-01-05 09:12 ./usr/share/doc/libgf2x3/changelog.Debian.gz -rw-r--r-- root/root 21911 2019-12-10 13:35 ./usr/share/doc/libgf2x3/changelog.gz -rw-r--r-- root/root 1599 2020-01-05 09:12 ./usr/share/doc/libgf2x3/copyright lintian ------- Setup apt archive ----------------- Merged Build-Depends: lintian:amd64 Filtered Build-Depends: lintian:amd64 dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<>/apt_archive/sbuild-build-depends-lintian-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [963 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [536 B] Get:5 copy:/<>/apt_archive ./ Packages [621 B] Fetched 2120 B in 0s (80.9 kB/s) Reading package lists... Reading package lists... Install lintian build dependencies (apt-based resolver) ------------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: diffstat gpg gpgconf libaliased-perl libapt-pkg-perl libassuan0 libb-hooks-endofscope-perl libb-hooks-op-check-perl libcapture-tiny-perl libclass-data-inheritable-perl libclass-method-modifiers-perl libclass-xsaccessor-perl libclone-perl libconfig-tiny-perl libcpanel-json-xs-perl libdata-dpath-perl libdata-messagepack-perl libdata-optlist-perl libdata-validate-domain-perl libdevel-callchecker-perl libdevel-size-perl libdevel-stacktrace-perl libdynaloader-functions-perl libemail-address-xs-perl libexception-class-perl libexporter-tiny-perl libfile-basedir-perl libfile-find-rule-perl libfont-ttf-perl libhtml-html5-entities-perl libimport-into-perl libipc-run3-perl libipc-system-simple-perl libiterator-perl libiterator-util-perl libjson-maybexs-perl liblist-compare-perl liblist-moreutils-perl liblist-moreutils-xs-perl liblist-utilsby-perl liblzo2-2 libmarkdown2 libmodule-implementation-perl libmodule-runtime-perl libmoo-perl libmoox-aliases-perl libmouse-perl libnamespace-clean-perl libnet-domain-tld-perl libnumber-compare-perl libpackage-stash-perl libparams-classify-perl libparams-util-perl libpath-tiny-perl libperlio-gzip-perl libproc-processtable-perl libreadline8 librole-tiny-perl libsereal-decoder-perl libsereal-encoder-perl libsqlite3-0 libstrictures-perl libsub-exporter-perl libsub-exporter-progressive-perl libsub-identify-perl libsub-install-perl libsub-name-perl libsub-quote-perl libtext-glob-perl libtext-levenshteinxs-perl libtext-markdown-discount-perl libtext-xslate-perl libtime-duration-perl libtime-moment-perl libtimedate-perl libtry-tiny-perl libtype-tiny-perl libunicode-utf8-perl liburi-perl libvariable-magic-perl libyaml-0-2 libyaml-libyaml-perl lintian lzip lzop patchutils readline-common t1utils unzip Suggested packages: libxml-parser-perl libscalar-number-perl libbareword-filehandles-perl libindirect-perl libmultidimensional-perl libdevel-lexalias-perl libwww-perl binutils-multiarch libtext-template-perl readline-doc zip Recommended packages: gnupg libpackage-stash-xs-perl libref-util-perl libtype-tiny-xs-perl The following NEW packages will be installed: diffstat gpg gpgconf libaliased-perl libapt-pkg-perl libassuan0 libb-hooks-endofscope-perl libb-hooks-op-check-perl libcapture-tiny-perl libclass-data-inheritable-perl libclass-method-modifiers-perl libclass-xsaccessor-perl libclone-perl libconfig-tiny-perl libcpanel-json-xs-perl libdata-dpath-perl libdata-messagepack-perl libdata-optlist-perl libdata-validate-domain-perl libdevel-callchecker-perl libdevel-size-perl libdevel-stacktrace-perl libdynaloader-functions-perl libemail-address-xs-perl libexception-class-perl libexporter-tiny-perl libfile-basedir-perl libfile-find-rule-perl libfont-ttf-perl libhtml-html5-entities-perl libimport-into-perl libipc-run3-perl libipc-system-simple-perl libiterator-perl libiterator-util-perl libjson-maybexs-perl liblist-compare-perl liblist-moreutils-perl liblist-moreutils-xs-perl liblist-utilsby-perl liblzo2-2 libmarkdown2 libmodule-implementation-perl libmodule-runtime-perl libmoo-perl libmoox-aliases-perl libmouse-perl libnamespace-clean-perl libnet-domain-tld-perl libnumber-compare-perl libpackage-stash-perl libparams-classify-perl libparams-util-perl libpath-tiny-perl libperlio-gzip-perl libproc-processtable-perl libreadline8 librole-tiny-perl libsereal-decoder-perl libsereal-encoder-perl libsqlite3-0 libstrictures-perl libsub-exporter-perl libsub-exporter-progressive-perl libsub-identify-perl libsub-install-perl libsub-name-perl libsub-quote-perl libtext-glob-perl libtext-levenshteinxs-perl libtext-markdown-discount-perl libtext-xslate-perl libtime-duration-perl libtime-moment-perl libtimedate-perl libtry-tiny-perl libtype-tiny-perl libunicode-utf8-perl liburi-perl libvariable-magic-perl libyaml-0-2 libyaml-libyaml-perl lintian lzip lzop patchutils readline-common sbuild-build-depends-lintian-dummy:s390x t1utils unzip 0 upgraded, 90 newly installed, 0 to remove and 0 not upgraded. Need to get 7627 kB of archives. After this operation, 21.7 MB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [848 B] Get:2 http://debian.oregonstate.edu/debian unstable/main amd64 readline-common all 8.1-2 [73.8 kB] Get:3 http://debian.oregonstate.edu/debian unstable/main amd64 libreadline8 amd64 8.1-2 [168 kB] Get:4 http://debian.oregonstate.edu/debian unstable/main amd64 diffstat amd64 1.64-1 [36.6 kB] Get:5 http://debian.oregonstate.edu/debian unstable/main amd64 libassuan0 amd64 2.5.4-1 [51.1 kB] Get:6 http://debian.oregonstate.edu/debian unstable/main amd64 gpgconf amd64 2.2.27-2 [547 kB] Get:7 http://debian.oregonstate.edu/debian unstable/main amd64 libsqlite3-0 amd64 3.34.1-3 [797 kB] Get:8 http://debian.oregonstate.edu/debian unstable/main amd64 gpg amd64 2.2.27-2 [927 kB] Get:9 http://debian.oregonstate.edu/debian unstable/main amd64 libaliased-perl all 0.34-1.1 [14.1 kB] Get:10 http://debian.oregonstate.edu/debian unstable/main amd64 libapt-pkg-perl amd64 0.1.40 [72.2 kB] Get:11 http://debian.oregonstate.edu/debian unstable/main amd64 libb-hooks-op-check-perl amd64 0.22-1+b3 [11.3 kB] Get:12 http://debian.oregonstate.edu/debian unstable/main amd64 libdynaloader-functions-perl all 0.003-1.1 [12.7 kB] Get:13 http://debian.oregonstate.edu/debian unstable/main amd64 libdevel-callchecker-perl amd64 0.008-1+b2 [15.9 kB] Get:14 http://debian.oregonstate.edu/debian unstable/main amd64 libparams-classify-perl amd64 0.015-1+b3 [25.7 kB] Get:15 http://debian.oregonstate.edu/debian unstable/main amd64 libmodule-runtime-perl all 0.016-1 [19.4 kB] Get:16 http://debian.oregonstate.edu/debian unstable/main amd64 libtry-tiny-perl all 0.30-1 [23.3 kB] Get:17 http://debian.oregonstate.edu/debian unstable/main amd64 libmodule-implementation-perl all 0.09-1.1 [12.4 kB] Get:18 http://debian.oregonstate.edu/debian unstable/main amd64 libsub-exporter-progressive-perl all 0.001013-1 [7588 B] Get:19 http://debian.oregonstate.edu/debian unstable/main amd64 libvariable-magic-perl amd64 0.62-1+b3 [45.7 kB] Get:20 http://debian.oregonstate.edu/debian unstable/main amd64 libb-hooks-endofscope-perl all 0.24-1.1 [18.9 kB] Get:21 http://debian.oregonstate.edu/debian unstable/main amd64 libcapture-tiny-perl all 0.48-1 [26.0 kB] Get:22 http://debian.oregonstate.edu/debian unstable/main amd64 libclass-data-inheritable-perl all 0.08-3 [8588 B] Get:23 http://debian.oregonstate.edu/debian unstable/main amd64 libclass-method-modifiers-perl all 2.13-1 [19.2 kB] Get:24 http://debian.oregonstate.edu/debian unstable/main amd64 libclass-xsaccessor-perl amd64 1.19-3+b7 [38.1 kB] Get:25 http://debian.oregonstate.edu/debian unstable/main amd64 libclone-perl amd64 0.45-1+b1 [15.4 kB] Get:26 http://debian.oregonstate.edu/debian unstable/main amd64 libconfig-tiny-perl all 2.26-1 [16.5 kB] Get:27 http://debian.oregonstate.edu/debian unstable/main amd64 libcpanel-json-xs-perl amd64 4.25-1+b1 [129 kB] Get:28 http://debian.oregonstate.edu/debian unstable/main amd64 libdevel-stacktrace-perl all 2.0400-1 [28.6 kB] Get:29 http://debian.oregonstate.edu/debian unstable/main amd64 libexception-class-perl all 1.44-1 [32.3 kB] Get:30 http://debian.oregonstate.edu/debian unstable/main amd64 libiterator-perl all 0.03+ds1-1.1 [18.4 kB] Get:31 http://debian.oregonstate.edu/debian unstable/main amd64 libiterator-util-perl all 0.02+ds1-1.1 [13.7 kB] Get:32 http://debian.oregonstate.edu/debian unstable/main amd64 libexporter-tiny-perl all 1.002002-1 [37.8 kB] Get:33 http://debian.oregonstate.edu/debian unstable/main amd64 liblist-moreutils-xs-perl amd64 0.430-2 [40.9 kB] Get:34 http://debian.oregonstate.edu/debian unstable/main amd64 liblist-moreutils-perl all 0.430-2 [46.9 kB] Get:35 http://debian.oregonstate.edu/debian unstable/main amd64 libparams-util-perl amd64 1.102-1+b1 [25.6 kB] Get:36 http://debian.oregonstate.edu/debian unstable/main amd64 libsub-install-perl all 0.928-1.1 [10.8 kB] Get:37 http://debian.oregonstate.edu/debian unstable/main amd64 libdata-optlist-perl all 0.110-1.1 [10.8 kB] Get:38 http://debian.oregonstate.edu/debian unstable/main amd64 libsub-exporter-perl all 0.987-1 [47.2 kB] Get:39 http://debian.oregonstate.edu/debian unstable/main amd64 libdata-dpath-perl all 0.58-1 [43.5 kB] Get:40 http://debian.oregonstate.edu/debian unstable/main amd64 libdata-messagepack-perl amd64 1.00-4+b1 [38.8 kB] Get:41 http://debian.oregonstate.edu/debian unstable/main amd64 libnet-domain-tld-perl all 1.75-1.1 [33.5 kB] Get:42 http://debian.oregonstate.edu/debian unstable/main amd64 libdata-validate-domain-perl all 0.10-1.1 [11.1 kB] Get:43 http://debian.oregonstate.edu/debian unstable/main amd64 libdevel-size-perl amd64 0.83-1+b2 [26.1 kB] Get:44 http://debian.oregonstate.edu/debian unstable/main amd64 libemail-address-xs-perl amd64 1.04-1+b3 [28.0 kB] Get:45 http://debian.oregonstate.edu/debian unstable/main amd64 libipc-system-simple-perl all 1.30-1 [28.2 kB] Get:46 http://debian.oregonstate.edu/debian unstable/main amd64 libfile-basedir-perl all 0.08-1 [17.7 kB] Get:47 http://debian.oregonstate.edu/debian unstable/main amd64 libnumber-compare-perl all 0.03-1.1 [6956 B] Get:48 http://debian.oregonstate.edu/debian unstable/main amd64 libtext-glob-perl all 0.11-1 [8888 B] Get:49 http://debian.oregonstate.edu/debian unstable/main amd64 libfile-find-rule-perl all 0.34-1 [30.6 kB] Get:50 http://debian.oregonstate.edu/debian unstable/main amd64 libfont-ttf-perl all 1.06-1.1 [318 kB] Get:51 http://debian.oregonstate.edu/debian unstable/main amd64 libhtml-html5-entities-perl all 0.004-1.1 [21.3 kB] Get:52 http://debian.oregonstate.edu/debian unstable/main amd64 libimport-into-perl all 1.002005-1 [11.6 kB] Get:53 http://debian.oregonstate.edu/debian unstable/main amd64 libipc-run3-perl all 0.048-2 [34.2 kB] Get:54 http://debian.oregonstate.edu/debian unstable/main amd64 libjson-maybexs-perl all 1.004003-1 [13.1 kB] Get:55 http://debian.oregonstate.edu/debian unstable/main amd64 liblist-compare-perl all 0.55-1 [66.9 kB] Get:56 http://debian.oregonstate.edu/debian unstable/main amd64 liblist-utilsby-perl all 0.11-1 [15.4 kB] Get:57 http://debian.oregonstate.edu/debian unstable/main amd64 liblzo2-2 amd64 2.10-2 [56.9 kB] Get:58 http://debian.oregonstate.edu/debian unstable/main amd64 libmarkdown2 amd64 2.2.6-1 [36.8 kB] Get:59 http://debian.oregonstate.edu/debian unstable/main amd64 librole-tiny-perl all 2.002004-1 [21.4 kB] Get:60 http://debian.oregonstate.edu/debian unstable/main amd64 libstrictures-perl all 2.000006-1 [18.6 kB] Get:61 http://debian.oregonstate.edu/debian unstable/main amd64 libsub-quote-perl all 2.006006-1 [21.0 kB] Get:62 http://debian.oregonstate.edu/debian unstable/main amd64 libmoo-perl all 2.004004-1 [59.9 kB] Get:63 http://debian.oregonstate.edu/debian unstable/main amd64 libmoox-aliases-perl all 0.001006-1.1 [10.8 kB] Get:64 http://debian.oregonstate.edu/debian unstable/main amd64 libmouse-perl amd64 2.5.10-1+b1 [172 kB] Get:65 http://debian.oregonstate.edu/debian unstable/main amd64 libpackage-stash-perl all 0.39-1 [21.9 kB] Get:66 http://debian.oregonstate.edu/debian unstable/main amd64 libsub-identify-perl amd64 0.14-1+b3 [12.0 kB] Get:67 http://debian.oregonstate.edu/debian unstable/main amd64 libsub-name-perl amd64 0.26-1+b1 [13.8 kB] Get:68 http://debian.oregonstate.edu/debian unstable/main amd64 libnamespace-clean-perl all 0.27-1 [17.3 kB] Get:69 http://debian.oregonstate.edu/debian unstable/main amd64 libpath-tiny-perl all 0.118-1 [53.5 kB] Get:70 http://debian.oregonstate.edu/debian unstable/main amd64 libperlio-gzip-perl amd64 0.19-1+b7 [17.4 kB] Get:71 http://debian.oregonstate.edu/debian unstable/main amd64 libproc-processtable-perl amd64 0.59-2+b1 [45.9 kB] Get:72 http://debian.oregonstate.edu/debian unstable/main amd64 libsereal-decoder-perl amd64 4.018+ds-1+b1 [99.3 kB] Get:73 http://debian.oregonstate.edu/debian unstable/main amd64 libsereal-encoder-perl amd64 4.018+ds-1+b1 [103 kB] Get:74 http://debian.oregonstate.edu/debian unstable/main amd64 libtext-levenshteinxs-perl amd64 0.03-4+b8 [8724 B] Get:75 http://debian.oregonstate.edu/debian unstable/main amd64 libtext-markdown-discount-perl amd64 0.12-1+b1 [13.0 kB] Get:76 http://debian.oregonstate.edu/debian unstable/main amd64 libtext-xslate-perl amd64 3.5.8-1+b1 [197 kB] Get:77 http://debian.oregonstate.edu/debian unstable/main amd64 libtime-duration-perl all 1.21-1 [13.7 kB] Get:78 http://debian.oregonstate.edu/debian unstable/main amd64 libtime-moment-perl amd64 0.44-1+b3 [75.8 kB] Get:79 http://debian.oregonstate.edu/debian unstable/main amd64 libtimedate-perl all 2.3300-2 [39.3 kB] Get:80 http://debian.oregonstate.edu/debian unstable/main amd64 libtype-tiny-perl all 1.012002-1 [351 kB] Get:81 http://debian.oregonstate.edu/debian unstable/main amd64 libunicode-utf8-perl amd64 0.62-1+b2 [20.3 kB] Get:82 http://debian.oregonstate.edu/debian unstable/main amd64 liburi-perl all 5.08-1 [90.6 kB] Get:83 http://debian.oregonstate.edu/debian unstable/main amd64 libyaml-0-2 amd64 0.2.2-1 [49.6 kB] Get:84 http://debian.oregonstate.edu/debian unstable/main amd64 libyaml-libyaml-perl amd64 0.82+repack-1+b1 [35.8 kB] Get:85 http://debian.oregonstate.edu/debian unstable/main amd64 lzip amd64 1.22-3 [88.5 kB] Get:86 http://debian.oregonstate.edu/debian unstable/main amd64 lzop amd64 1.04-2 [84.2 kB] Get:87 http://debian.oregonstate.edu/debian unstable/main amd64 patchutils amd64 0.4.2-1 [77.5 kB] Get:88 http://debian.oregonstate.edu/debian unstable/main amd64 t1utils amd64 1.41-4 [62.1 kB] Get:89 http://debian.oregonstate.edu/debian unstable/main amd64 unzip amd64 6.0-26 [171 kB] Get:90 http://debian.oregonstate.edu/debian unstable/main amd64 lintian all 2.104.0 [1265 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 7627 kB in 0s (27.7 MB/s) Selecting previously unselected package readline-common. (Reading database ... 21009 files and directories currently installed.) Preparing to unpack .../00-readline-common_8.1-2_all.deb ... Unpacking readline-common (8.1-2) ... Selecting previously unselected package libreadline8:amd64. Preparing to unpack .../01-libreadline8_8.1-2_amd64.deb ... Unpacking libreadline8:amd64 (8.1-2) ... Selecting previously unselected package diffstat. Preparing to unpack .../02-diffstat_1.64-1_amd64.deb ... Unpacking diffstat (1.64-1) ... Selecting previously unselected package libassuan0:amd64. Preparing to unpack .../03-libassuan0_2.5.4-1_amd64.deb ... Unpacking libassuan0:amd64 (2.5.4-1) ... Selecting previously unselected package gpgconf. Preparing to unpack .../04-gpgconf_2.2.27-2_amd64.deb ... Unpacking gpgconf (2.2.27-2) ... Selecting previously unselected package libsqlite3-0:amd64. Preparing to unpack .../05-libsqlite3-0_3.34.1-3_amd64.deb ... Unpacking libsqlite3-0:amd64 (3.34.1-3) ... Selecting previously unselected package gpg. Preparing to unpack .../06-gpg_2.2.27-2_amd64.deb ... Unpacking gpg (2.2.27-2) ... Selecting previously unselected package libaliased-perl. Preparing to unpack .../07-libaliased-perl_0.34-1.1_all.deb ... Unpacking libaliased-perl (0.34-1.1) ... Selecting previously unselected package libapt-pkg-perl. Preparing to unpack .../08-libapt-pkg-perl_0.1.40_amd64.deb ... Unpacking libapt-pkg-perl (0.1.40) ... Selecting previously unselected package libb-hooks-op-check-perl. Preparing to unpack .../09-libb-hooks-op-check-perl_0.22-1+b3_amd64.deb ... Unpacking libb-hooks-op-check-perl (0.22-1+b3) ... Selecting previously unselected package libdynaloader-functions-perl. Preparing to unpack .../10-libdynaloader-functions-perl_0.003-1.1_all.deb ... Unpacking libdynaloader-functions-perl (0.003-1.1) ... Selecting previously unselected package libdevel-callchecker-perl. Preparing to unpack .../11-libdevel-callchecker-perl_0.008-1+b2_amd64.deb ... Unpacking libdevel-callchecker-perl (0.008-1+b2) ... Selecting previously unselected package libparams-classify-perl. Preparing to unpack .../12-libparams-classify-perl_0.015-1+b3_amd64.deb ... Unpacking libparams-classify-perl (0.015-1+b3) ... Selecting previously unselected package libmodule-runtime-perl. Preparing to unpack .../13-libmodule-runtime-perl_0.016-1_all.deb ... Unpacking libmodule-runtime-perl (0.016-1) ... Selecting previously unselected package libtry-tiny-perl. Preparing to unpack .../14-libtry-tiny-perl_0.30-1_all.deb ... Unpacking libtry-tiny-perl (0.30-1) ... Selecting previously unselected package libmodule-implementation-perl. Preparing to unpack .../15-libmodule-implementation-perl_0.09-1.1_all.deb ... Unpacking libmodule-implementation-perl (0.09-1.1) ... Selecting previously unselected package libsub-exporter-progressive-perl. Preparing to unpack .../16-libsub-exporter-progressive-perl_0.001013-1_all.deb ... Unpacking libsub-exporter-progressive-perl (0.001013-1) ... Selecting previously unselected package libvariable-magic-perl. Preparing to unpack .../17-libvariable-magic-perl_0.62-1+b3_amd64.deb ... Unpacking libvariable-magic-perl (0.62-1+b3) ... Selecting previously unselected package libb-hooks-endofscope-perl. Preparing to unpack .../18-libb-hooks-endofscope-perl_0.24-1.1_all.deb ... Unpacking libb-hooks-endofscope-perl (0.24-1.1) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../19-libcapture-tiny-perl_0.48-1_all.deb ... Unpacking libcapture-tiny-perl (0.48-1) ... Selecting previously unselected package libclass-data-inheritable-perl. Preparing to unpack .../20-libclass-data-inheritable-perl_0.08-3_all.deb ... Unpacking libclass-data-inheritable-perl (0.08-3) ... Selecting previously unselected package libclass-method-modifiers-perl. Preparing to unpack .../21-libclass-method-modifiers-perl_2.13-1_all.deb ... Unpacking libclass-method-modifiers-perl (2.13-1) ... Selecting previously unselected package libclass-xsaccessor-perl. Preparing to unpack .../22-libclass-xsaccessor-perl_1.19-3+b7_amd64.deb ... Unpacking libclass-xsaccessor-perl (1.19-3+b7) ... Selecting previously unselected package libclone-perl. Preparing to unpack .../23-libclone-perl_0.45-1+b1_amd64.deb ... Unpacking libclone-perl (0.45-1+b1) ... Selecting previously unselected package libconfig-tiny-perl. Preparing to unpack .../24-libconfig-tiny-perl_2.26-1_all.deb ... Unpacking libconfig-tiny-perl (2.26-1) ... Selecting previously unselected package libcpanel-json-xs-perl. Preparing to unpack .../25-libcpanel-json-xs-perl_4.25-1+b1_amd64.deb ... Unpacking libcpanel-json-xs-perl (4.25-1+b1) ... Selecting previously unselected package libdevel-stacktrace-perl. Preparing to unpack .../26-libdevel-stacktrace-perl_2.0400-1_all.deb ... Unpacking libdevel-stacktrace-perl (2.0400-1) ... Selecting previously unselected package libexception-class-perl. Preparing to unpack .../27-libexception-class-perl_1.44-1_all.deb ... Unpacking libexception-class-perl (1.44-1) ... Selecting previously unselected package libiterator-perl. Preparing to unpack .../28-libiterator-perl_0.03+ds1-1.1_all.deb ... Unpacking libiterator-perl (0.03+ds1-1.1) ... Selecting previously unselected package libiterator-util-perl. Preparing to unpack .../29-libiterator-util-perl_0.02+ds1-1.1_all.deb ... Unpacking libiterator-util-perl (0.02+ds1-1.1) ... Selecting previously unselected package libexporter-tiny-perl. Preparing to unpack .../30-libexporter-tiny-perl_1.002002-1_all.deb ... Unpacking libexporter-tiny-perl (1.002002-1) ... Selecting previously unselected package liblist-moreutils-xs-perl. Preparing to unpack .../31-liblist-moreutils-xs-perl_0.430-2_amd64.deb ... Unpacking liblist-moreutils-xs-perl (0.430-2) ... Selecting previously unselected package liblist-moreutils-perl. Preparing to unpack .../32-liblist-moreutils-perl_0.430-2_all.deb ... Unpacking liblist-moreutils-perl (0.430-2) ... Selecting previously unselected package libparams-util-perl. Preparing to unpack .../33-libparams-util-perl_1.102-1+b1_amd64.deb ... Unpacking libparams-util-perl (1.102-1+b1) ... Selecting previously unselected package libsub-install-perl. Preparing to unpack .../34-libsub-install-perl_0.928-1.1_all.deb ... Unpacking libsub-install-perl (0.928-1.1) ... Selecting previously unselected package libdata-optlist-perl. Preparing to unpack .../35-libdata-optlist-perl_0.110-1.1_all.deb ... Unpacking libdata-optlist-perl (0.110-1.1) ... Selecting previously unselected package libsub-exporter-perl. Preparing to unpack .../36-libsub-exporter-perl_0.987-1_all.deb ... Unpacking libsub-exporter-perl (0.987-1) ... Selecting previously unselected package libdata-dpath-perl. Preparing to unpack .../37-libdata-dpath-perl_0.58-1_all.deb ... Unpacking libdata-dpath-perl (0.58-1) ... Selecting previously unselected package libdata-messagepack-perl. Preparing to unpack .../38-libdata-messagepack-perl_1.00-4+b1_amd64.deb ... Unpacking libdata-messagepack-perl (1.00-4+b1) ... Selecting previously unselected package libnet-domain-tld-perl. Preparing to unpack .../39-libnet-domain-tld-perl_1.75-1.1_all.deb ... Unpacking libnet-domain-tld-perl (1.75-1.1) ... Selecting previously unselected package libdata-validate-domain-perl. Preparing to unpack .../40-libdata-validate-domain-perl_0.10-1.1_all.deb ... Unpacking libdata-validate-domain-perl (0.10-1.1) ... Selecting previously unselected package libdevel-size-perl. Preparing to unpack .../41-libdevel-size-perl_0.83-1+b2_amd64.deb ... Unpacking libdevel-size-perl (0.83-1+b2) ... Selecting previously unselected package libemail-address-xs-perl. Preparing to unpack .../42-libemail-address-xs-perl_1.04-1+b3_amd64.deb ... Unpacking libemail-address-xs-perl (1.04-1+b3) ... Selecting previously unselected package libipc-system-simple-perl. Preparing to unpack .../43-libipc-system-simple-perl_1.30-1_all.deb ... Unpacking libipc-system-simple-perl (1.30-1) ... Selecting previously unselected package libfile-basedir-perl. Preparing to unpack .../44-libfile-basedir-perl_0.08-1_all.deb ... Unpacking libfile-basedir-perl (0.08-1) ... Selecting previously unselected package libnumber-compare-perl. Preparing to unpack .../45-libnumber-compare-perl_0.03-1.1_all.deb ... Unpacking libnumber-compare-perl (0.03-1.1) ... Selecting previously unselected package libtext-glob-perl. Preparing to unpack .../46-libtext-glob-perl_0.11-1_all.deb ... Unpacking libtext-glob-perl (0.11-1) ... Selecting previously unselected package libfile-find-rule-perl. Preparing to unpack .../47-libfile-find-rule-perl_0.34-1_all.deb ... Unpacking libfile-find-rule-perl (0.34-1) ... Selecting previously unselected package libfont-ttf-perl. Preparing to unpack .../48-libfont-ttf-perl_1.06-1.1_all.deb ... Unpacking libfont-ttf-perl (1.06-1.1) ... Selecting previously unselected package libhtml-html5-entities-perl. Preparing to unpack .../49-libhtml-html5-entities-perl_0.004-1.1_all.deb ... Unpacking libhtml-html5-entities-perl (0.004-1.1) ... Selecting previously unselected package libimport-into-perl. Preparing to unpack .../50-libimport-into-perl_1.002005-1_all.deb ... Unpacking libimport-into-perl (1.002005-1) ... Selecting previously unselected package libipc-run3-perl. Preparing to unpack .../51-libipc-run3-perl_0.048-2_all.deb ... Unpacking libipc-run3-perl (0.048-2) ... Selecting previously unselected package libjson-maybexs-perl. Preparing to unpack .../52-libjson-maybexs-perl_1.004003-1_all.deb ... Unpacking libjson-maybexs-perl (1.004003-1) ... Selecting previously unselected package liblist-compare-perl. Preparing to unpack .../53-liblist-compare-perl_0.55-1_all.deb ... Unpacking liblist-compare-perl (0.55-1) ... Selecting previously unselected package liblist-utilsby-perl. Preparing to unpack .../54-liblist-utilsby-perl_0.11-1_all.deb ... Unpacking liblist-utilsby-perl (0.11-1) ... Selecting previously unselected package liblzo2-2:amd64. Preparing to unpack .../55-liblzo2-2_2.10-2_amd64.deb ... Unpacking liblzo2-2:amd64 (2.10-2) ... Selecting previously unselected package libmarkdown2:amd64. Preparing to unpack .../56-libmarkdown2_2.2.6-1_amd64.deb ... Unpacking libmarkdown2:amd64 (2.2.6-1) ... Selecting previously unselected package librole-tiny-perl. Preparing to unpack .../57-librole-tiny-perl_2.002004-1_all.deb ... Unpacking librole-tiny-perl (2.002004-1) ... Selecting previously unselected package libstrictures-perl. Preparing to unpack .../58-libstrictures-perl_2.000006-1_all.deb ... Unpacking libstrictures-perl (2.000006-1) ... Selecting previously unselected package libsub-quote-perl. Preparing to unpack .../59-libsub-quote-perl_2.006006-1_all.deb ... Unpacking libsub-quote-perl (2.006006-1) ... Selecting previously unselected package libmoo-perl. Preparing to unpack .../60-libmoo-perl_2.004004-1_all.deb ... Unpacking libmoo-perl (2.004004-1) ... Selecting previously unselected package libmoox-aliases-perl. Preparing to unpack .../61-libmoox-aliases-perl_0.001006-1.1_all.deb ... Unpacking libmoox-aliases-perl (0.001006-1.1) ... Selecting previously unselected package libmouse-perl. Preparing to unpack .../62-libmouse-perl_2.5.10-1+b1_amd64.deb ... Unpacking libmouse-perl (2.5.10-1+b1) ... Selecting previously unselected package libpackage-stash-perl. Preparing to unpack .../63-libpackage-stash-perl_0.39-1_all.deb ... Unpacking libpackage-stash-perl (0.39-1) ... Selecting previously unselected package libsub-identify-perl. Preparing to unpack .../64-libsub-identify-perl_0.14-1+b3_amd64.deb ... Unpacking libsub-identify-perl (0.14-1+b3) ... Selecting previously unselected package libsub-name-perl. Preparing to unpack .../65-libsub-name-perl_0.26-1+b1_amd64.deb ... Unpacking libsub-name-perl (0.26-1+b1) ... Selecting previously unselected package libnamespace-clean-perl. Preparing to unpack .../66-libnamespace-clean-perl_0.27-1_all.deb ... Unpacking libnamespace-clean-perl (0.27-1) ... Selecting previously unselected package libpath-tiny-perl. Preparing to unpack .../67-libpath-tiny-perl_0.118-1_all.deb ... Unpacking libpath-tiny-perl (0.118-1) ... Selecting previously unselected package libperlio-gzip-perl. Preparing to unpack .../68-libperlio-gzip-perl_0.19-1+b7_amd64.deb ... Unpacking libperlio-gzip-perl (0.19-1+b7) ... Selecting previously unselected package libproc-processtable-perl. Preparing to unpack .../69-libproc-processtable-perl_0.59-2+b1_amd64.deb ... Unpacking libproc-processtable-perl (0.59-2+b1) ... Selecting previously unselected package libsereal-decoder-perl. Preparing to unpack .../70-libsereal-decoder-perl_4.018+ds-1+b1_amd64.deb ... Unpacking libsereal-decoder-perl (4.018+ds-1+b1) ... Selecting previously unselected package libsereal-encoder-perl. Preparing to unpack .../71-libsereal-encoder-perl_4.018+ds-1+b1_amd64.deb ... Unpacking libsereal-encoder-perl (4.018+ds-1+b1) ... Selecting previously unselected package libtext-levenshteinxs-perl. Preparing to unpack .../72-libtext-levenshteinxs-perl_0.03-4+b8_amd64.deb ... Unpacking libtext-levenshteinxs-perl (0.03-4+b8) ... Selecting previously unselected package libtext-markdown-discount-perl:amd64. Preparing to unpack .../73-libtext-markdown-discount-perl_0.12-1+b1_amd64.deb ... Unpacking libtext-markdown-discount-perl:amd64 (0.12-1+b1) ... Selecting previously unselected package libtext-xslate-perl. Preparing to unpack .../74-libtext-xslate-perl_3.5.8-1+b1_amd64.deb ... Unpacking libtext-xslate-perl (3.5.8-1+b1) ... Selecting previously unselected package libtime-duration-perl. Preparing to unpack .../75-libtime-duration-perl_1.21-1_all.deb ... Unpacking libtime-duration-perl (1.21-1) ... Selecting previously unselected package libtime-moment-perl. Preparing to unpack .../76-libtime-moment-perl_0.44-1+b3_amd64.deb ... Unpacking libtime-moment-perl (0.44-1+b3) ... Selecting previously unselected package libtimedate-perl. Preparing to unpack .../77-libtimedate-perl_2.3300-2_all.deb ... Unpacking libtimedate-perl (2.3300-2) ... Selecting previously unselected package libtype-tiny-perl. Preparing to unpack .../78-libtype-tiny-perl_1.012002-1_all.deb ... Unpacking libtype-tiny-perl (1.012002-1) ... Selecting previously unselected package libunicode-utf8-perl. Preparing to unpack .../79-libunicode-utf8-perl_0.62-1+b2_amd64.deb ... Unpacking libunicode-utf8-perl (0.62-1+b2) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../80-liburi-perl_5.08-1_all.deb ... Unpacking liburi-perl (5.08-1) ... Selecting previously unselected package libyaml-0-2:amd64. Preparing to unpack .../81-libyaml-0-2_0.2.2-1_amd64.deb ... Unpacking libyaml-0-2:amd64 (0.2.2-1) ... Selecting previously unselected package libyaml-libyaml-perl. Preparing to unpack .../82-libyaml-libyaml-perl_0.82+repack-1+b1_amd64.deb ... Unpacking libyaml-libyaml-perl (0.82+repack-1+b1) ... Selecting previously unselected package lzip. Preparing to unpack .../83-lzip_1.22-3_amd64.deb ... Unpacking lzip (1.22-3) ... Selecting previously unselected package lzop. Preparing to unpack .../84-lzop_1.04-2_amd64.deb ... Unpacking lzop (1.04-2) ... Selecting previously unselected package patchutils. Preparing to unpack .../85-patchutils_0.4.2-1_amd64.deb ... Unpacking patchutils (0.4.2-1) ... Selecting previously unselected package t1utils. Preparing to unpack .../86-t1utils_1.41-4_amd64.deb ... Unpacking t1utils (1.41-4) ... Selecting previously unselected package unzip. Preparing to unpack .../87-unzip_6.0-26_amd64.deb ... Unpacking unzip (6.0-26) ... Selecting previously unselected package lintian. Preparing to unpack .../88-lintian_2.104.0_all.deb ... Unpacking lintian (2.104.0) ... Selecting previously unselected package sbuild-build-depends-lintian-dummy:s390x. Preparing to unpack .../89-sbuild-build-depends-lintian-dummy_0.invalid.0_s390x.deb ... Unpacking sbuild-build-depends-lintian-dummy:s390x (0.invalid.0) ... Setting up libapt-pkg-perl (0.1.40) ... Setting up libunicode-utf8-perl (0.62-1+b2) ... Setting up libmouse-perl (2.5.10-1+b1) ... Setting up libdata-messagepack-perl (1.00-4+b1) ... Setting up libdynaloader-functions-perl (0.003-1.1) ... Setting up libtext-glob-perl (0.11-1) ... Setting up libclass-method-modifiers-perl (2.13-1) ... Setting up liblist-compare-perl (0.55-1) ... Setting up libclone-perl (0.45-1+b1) ... Setting up libyaml-0-2:amd64 (0.2.2-1) ... Setting up libsub-identify-perl (0.14-1+b3) ... Setting up libcpanel-json-xs-perl (4.25-1+b1) ... Setting up libdevel-size-perl (0.83-1+b2) ... Setting up unzip (6.0-26) ... Setting up libsqlite3-0:amd64 (3.34.1-3) ... Setting up libyaml-libyaml-perl (0.82+repack-1+b1) ... Setting up libtry-tiny-perl (0.30-1) ... Setting up liblzo2-2:amd64 (2.10-2) ... Setting up libtime-moment-perl (0.44-1+b3) ... Setting up libassuan0:amd64 (2.5.4-1) ... Setting up libconfig-tiny-perl (2.26-1) ... Setting up libsereal-encoder-perl (4.018+ds-1+b1) ... Setting up liblist-utilsby-perl (0.11-1) ... Setting up libsub-install-perl (0.928-1.1) ... Setting up libnumber-compare-perl (0.03-1.1) ... Setting up patchutils (0.4.2-1) ... Setting up libjson-maybexs-perl (1.004003-1) ... Setting up libclass-data-inheritable-perl (0.08-3) ... Setting up libfile-find-rule-perl (0.34-1) ... Setting up libipc-system-simple-perl (1.30-1) ... Setting up libnet-domain-tld-perl (1.75-1.1) ... Setting up lzip (1.22-3) ... Setting up t1utils (1.41-4) ... Setting up diffstat (1.64-1) ... Setting up libvariable-magic-perl (0.62-1+b3) ... Setting up libb-hooks-op-check-perl (0.22-1+b3) ... Setting up liblist-moreutils-xs-perl (0.430-2) ... Setting up libparams-util-perl (1.102-1+b1) ... Setting up libtime-duration-perl (1.21-1) ... Setting up libtext-xslate-perl (3.5.8-1+b1) ... Setting up libsub-exporter-progressive-perl (0.001013-1) ... Setting up libcapture-tiny-perl (0.48-1) ... Setting up libtimedate-perl (2.3300-2) ... Setting up libsub-name-perl (0.26-1+b1) ... Setting up libdata-validate-domain-perl (0.10-1.1) ... Setting up libproc-processtable-perl (0.59-2+b1) ... Setting up libpath-tiny-perl (0.118-1) ... Setting up lzop (1.04-2) ... Setting up librole-tiny-perl (2.002004-1) ... Setting up libipc-run3-perl (0.048-2) ... Setting up libaliased-perl (0.34-1.1) ... Setting up libstrictures-perl (2.000006-1) ... Setting up libsub-quote-perl (2.006006-1) ... Setting up libdevel-stacktrace-perl (2.0400-1) ... Setting up libclass-xsaccessor-perl (1.19-3+b7) ... Setting up libexporter-tiny-perl (1.002002-1) ... Setting up libfont-ttf-perl (1.06-1.1) ... Setting up libtext-levenshteinxs-perl (0.03-4+b8) ... Setting up libperlio-gzip-perl (0.19-1+b7) ... Setting up readline-common (8.1-2) ... Setting up libhtml-html5-entities-perl (0.004-1.1) ... Setting up libsereal-decoder-perl (4.018+ds-1+b1) ... Setting up libmarkdown2:amd64 (2.2.6-1) ... Setting up liburi-perl (5.08-1) ... Setting up libemail-address-xs-perl (1.04-1+b3) ... Setting up libfile-basedir-perl (0.08-1) ... Setting up liblist-moreutils-perl (0.430-2) ... Setting up libreadline8:amd64 (8.1-2) ... Setting up libtype-tiny-perl (1.012002-1) ... Setting up libtext-markdown-discount-perl:amd64 (0.12-1+b1) ... Setting up libexception-class-perl (1.44-1) ... Setting up libdevel-callchecker-perl (0.008-1+b2) ... Setting up libdata-optlist-perl (0.110-1.1) ... Setting up gpgconf (2.2.27-2) ... Setting up gpg (2.2.27-2) ... Setting up libsub-exporter-perl (0.987-1) ... Setting up libiterator-perl (0.03+ds1-1.1) ... Setting up libiterator-util-perl (0.02+ds1-1.1) ... Setting up libparams-classify-perl (0.015-1+b3) ... Setting up libmodule-runtime-perl (0.016-1) ... Setting up libdata-dpath-perl (0.58-1) ... Setting up libmodule-implementation-perl (0.09-1.1) ... Setting up libpackage-stash-perl (0.39-1) ... Setting up libimport-into-perl (1.002005-1) ... Setting up libmoo-perl (2.004004-1) ... Setting up libmoox-aliases-perl (0.001006-1.1) ... Setting up libb-hooks-endofscope-perl (0.24-1.1) ... Setting up libnamespace-clean-perl (0.27-1) ... Setting up lintian (2.104.0) ... Setting up sbuild-build-depends-lintian-dummy:s390x (0.invalid.0) ... Processing triggers for man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Processing triggers for libc-bin (2.31-12) ... I: Lintian run was successful. +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Profiles: cross nocheck Build Type: any Build-Space: 9720 Build-Time: 27 Distribution: unstable Foreign Architectures: s390x Host Architecture: s390x Install-Time: 33 Job: gf2x_1.3.0-1 Lintian: pass Machine Architecture: amd64 Package: gf2x Package-Time: 74 Source-Version: 1.3.0-1 Space: 9720 Status: successful Version: 1.3.0-1 -------------------------------------------------------------------------------- Finished at 2021-05-16T20:55:03Z Build needed 00:01:14, 9720k disk space